Just set it up so that you have two linksets in zapata.conf. You
can't
do comma separation for your sigchan and defaultdpc. You have to
declare those one at a time. Also, your zaptel.conf needs to have
your
signalling channel set to be dchan (or hardhdlc if you're using a card
that supports it).
Matthew Fredrickson
On Sep 29, 2006, at 3:09 AM, Mr.Surender Reddy wrote:
> Dear Matthew,
> I Thankx for our Intrest to help me out in
> this.Below are the Details which iam using for Chanss7 .But i want
to
> try Libss7 Please help me out.
>
> ss7.conf of Chanss7
>
>
>
> [linkset-Ts1]
>
> enabled => yes
>
> enable_st => yes
>
> use_connect => yes
>
> hunting_policy => seq_htl
>
> context => ss7
>
> subservice => 8
>
> [linkset-Ts2]
>
> enabled => yes
>
> enable_st => yes
>
> use_connect =>yes
>
> hunting_policy => seq_htl
>
> context => ss7
>
> subservice => 8
>
> [link-l1]
>
> linkset => Ts1
>
> channels => 1-15,17-31
>
> schannel => 16
>
> firstcic => 1
>
> enabled => yes
>
> [link-l2]
>
> linkset => Ts1
>
> channels => 1-31
>
> schannel =>
>
> firstcic => 33
>
> enabled => YES
>
> [link-l3]
>
> linkset => Ts2
>
> channels =>1-15,17-31
>
> schannel => 16
>
> firstcic => 1
>
> enabled => yes
>
> [link-l4]
>
> linkset => Ts2
>
> channels => 1-31
>
> schannel =>
>
> firstcic => 33
>
> enabled => YES
>
> [host-localhost.localdomain]
>
> enabled => yes
>
> default_linkset => Ts2
>
> opc => 124
>
> dpc => Ts1:31,Ts2:32
>
> links => l1:1,l2:2,l3:3,l4:4
> This is the zaptel.conf
>
>
>
> span=1,0,0,ccs,hdb3
>
> bchan = 1-31
>
> span=2,0,0,ccs,hdb3
>
> bchan=32-62
>
> span=3,0,0,ccs,hdb3
>
> bchan=63-93
>
> span=4,1,0,ccs,hdb3
>
> bchan=94-124
>
>
> loadzone = us
>
> defaultzone = us
> I have compiled the Libss7 and tried to use that but iam unable to
use
> that as Zapta.conf i couldnt configure fine i tired this way i dont
> think that is correct Can u please see this Zapta.conf which i
wanted
> to use for libss7
>
>
> Signaling type SS7
> signalling = ss7
>
> ; Variant of SS7 signaling:
> ; Options are itu and ansi
> ss7type = itu
>
> ; All settings apply to linkset 1
> linkset = 1
>
> ; Point code of the linkset
> pointcode = 124
>
> ; Point code of node adjacent to this signaling link (Possibly the
STP
> between you and
> ; your destination)
> adjpointcode = 31,32
>
> ; Default point code that you would like to assign to outgoing
> messages (in case of
> ; routing through STPs, or using A links)
> defaultdpc = 31,32
>
> ; Begin CIC (Circuit indication codes) count with this number
> cicbeginswith = 1
>
> ; What the MTP3 network indicator bits should be set to. Choices
are
> ; national, national_spare, international, international_spare
> networkindicator=national
>
> ; First signaling channel
> sigchan = 16
>
> ; Channels to associate with CICs on this linkset
> channel = 25-47
> regards
> surender
>
>
> On 28/09/06, Matthew Fredrickson < [EMAIL PROTECTED]> wrote: What
is
> the layout of your spans (which channel is the signalling
>> channel on) and what is your layout of your CICs ( i.e. what
channels
>> map to which CICs).After you find that out post your zaptel.conf
and
>> zapata.conf and we'll see if we can sort it out.
>>
>> Matthew Fredrickson
>>
>> On Sep 28, 2006, at 1:49 AM, Mr.Surender Reddy wrote:
>>
>> > HI Matthew,
>> > Iam using Chanss7 i would like to test Libss7 iam
>> > unable to configure my SS7 channels with this version I have two
ss7
>> > Links i would like to test both on this machine.How can i do this
>> can
>> > u please guide me if u dont mind.
>> >
>> > regards
>> > surender
>> >
>> >
>> > On 27/09/06, Matthew Fredrickson < [EMAIL PROTECTED]> wrote:
>> >> On Sep 26, 2006, at 9:44 PM, Rob Hillis wrote:
>> >>
>> >> >> Also, you may want to get asterisk trunk as well, since
>> >> >> that I merged in all the libss7 changes from the asterisk-ss7
>> >> branch
>> >> >> into asterisk-trunk. (svn co
>> >> http://svn.digium.com/svn/asterisk/trunk
>> >>>> asterisk-trunk)
>> >> >
>> >> >
>> >> > So does this mean that the asterisk-ss7 branch is no longer
under
>> >> > development and all future changes are going to be made to the
>> >> Asterisk
>> >> > trunk?Should I be looking at moving from the asterisk-ss7
branch
>> >> to
>> >> > the
>> >> > main asterisk trunk?
>> >>
>> >> For the time being, yes, that would probably be a good idea.I
think
>> >> I
>> >> may re-branch the asterisk-ss7 branch whenever the 1.4 release
>> comes
>> >> out though and backport the changes in trunk to the 1.4 based
ss7
>> >> branch.
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
