[linkset-Ts1]
enabled => yes
enable_st => yes
use_connect => yes
hunting_policy => seq_htl
context => ss7
subservice => 8
[linkset-Ts2]
enabled => yes
enable_st => yes
use_connect =>yes
hunting_policy => seq_htl
context => ss7
subservice => 8
[link-l1]
linkset => Ts1
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes
[link-l2]
linkset => Ts1
channels => 1-31
schannel =>
firstcic => 33
enabled => YES
[link-l3]
linkset => Ts2
channels =>1-15,17-31
schannel => 16
firstcic => 1
enabled => yes
[link-l4]
linkset => Ts2
channels => 1-31
schannel =>
firstcic => 33
enabled => YES
[host-localhost.localdomain]
enabled => yes
default_linkset => Ts2
opc => 124
dpc => Ts1:31,Ts2:32
links => l1:1,l2:2,l3:3,l4:4
This is the zaptel.confspan=1,0,0,ccs,hdb3
bchan = 1-31
span=2,0,0,ccs,hdb3
bchan=32-62
span=3,0,0,ccs,hdb3
bchan=63-93
span=4,1,0,ccs,hdb3
bchan=94-124
loadzone = us
defaultzone = us
I have compiled the Libss7 and tried to use that but iam unable to use that as Zapta.conf i couldnt configure fine i tired this way i dont think that is correct Can u please see this Zapta.conf which i wanted to use for libss7 Signaling type SS7
signalling = ss7
; Variant of SS7 signaling:
; Options are itu and ansi
ss7type = itu
; All settings apply to linkset 1
linkset = 1
; Point code of the linkset
pointcode = 124
; Point code of node adjacent to this signaling link (Possibly the STP between you and
; your destination)
adjpointcode = 31,32
; Default point code that you would like to assign to outgoing messages (in case of
; routing through STPs, or using A links)
defaultdpc = 31,32
; Begin CIC (Circuit indication codes) count with this number
cicbeginswith = 1
; What the MTP3 network indicator bits should be set to. Choices are
; national, national_spare, international, international_spare
networkindicator=national
; First signaling channel
sigchan = 16
; Channels to associate with CICs on this linkset
channel = 25-47
What is the layout of your spans (which channel is the signalling
channel on) and what is your layout of your CICs ( i.e. what channels
map to which CICs). After you find that out post your zaptel.conf and
zapata.conf and we'll see if we can sort it out.
Matthew Fredrickson
On Sep 28, 2006, at 1:49 AM, Mr.Surender Reddy wrote:
> HI Matthew,
> Iam using Chanss7 i would like to test Libss7 iam
> unable to configure my SS7 channels with this version I have two ss7
> Links i would like to test both on this machine.How can i do this can
> u please guide me if u dont mind.
>
> regards
> surender
>
>
> On 27/09/06, Matthew Fredrickson <[EMAIL PROTECTED]> wrote:
>> On Sep 26, 2006, at 9:44 PM, Rob Hillis wrote:
>>
>> >> Also, you may want to get asterisk trunk as well, since
>> >> that I merged in all the libss7 changes from the asterisk-ss7
>> branch
>> >> into asterisk-trunk. (svn co
>> http://svn.digium.com/svn/asterisk/trunk
>> >> asterisk-trunk)
>> >
>> >
>> > So does this mean that the asterisk-ss7 branch is no longer under
>> > development and all future changes are going to be made to the
>> Asterisk
>> > trunk?Should I be looking at moving from the asterisk-ss7 branch
>> to
>> > the
>> > main asterisk trunk?
>>
>> For the time being, yes, that would probably be a good idea.I think
>> I
>> may re-branch the asterisk-ss7 branch whenever the 1.4 release comes
>> out though and backport the changes in trunk to the 1.4 based ss7
>> branch.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
