> From: Vincent Legoll <vincent.leg...@gmail.com> > Date: Sun, 6 Apr 2025 17:46:29 +0000
Hi Vincent, We don't have support for the RK3528 SoC yet. In particular there is no support for this SoC in the rkclock(4) and rkpinctrl(4) drivers yet. That is probably why some of the devices don't work properly. Adding support shouldn't be particularly difficult. Let me know if you want to have a go at it. Otherwise, I'll see what I can do for you once 7.7 is out of the door. Cheers, Mark > Hello, > > I just booted 7.6 on a radxa e20c > > I used : > * Jonas Karlman's u-boot rk3528 branch > (https://source.denx.de/u-boot/contributors/kwiboo/u-boot/-/commits/rk3528) > * blobs from master branch (https://github.com/rockchip-linux/rkbin.git) > * OpenBSD, arm64/miniroot76.img > > Here is the dmesg: > > disks: sd0* sd1 > >> OpenBSD/arm64 BOOTAA64 1.20 > boot> > cannot open sd0a:/etc/random.seed: No such file or directory > booting sd0a:/bsd: 3063388+1250408+12713224+636192 > [271998+91+707664+290184]=0x13f15e0 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2024 OpenBSD. All rights reserved. > https://www.OpenBSD.org > > OpenBSD 7.6 (RAMDISK) #187: Fri Sep 27 00:29:36 MDT 2024 > dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK > real mem = 1069932544 (1020MB) > avail mem = 996495360 (950MB) > random: good seed from bootblocks > mainbus0 at root: Radxa E20C > psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND > efi0 at mainbus0: UEFI 2.11 > efi0: Das U-Boot rev 0x20250400 > smbios0 at efi0: SMBIOS 3.7.0 > smbios0: vendor U-Boot version "2025.04-rc4-g471f33d42f7a" date 04/01/2025 > smbios0: radxa Radxa E20C > cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 > cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache > cpu0: 256KB 64b/line 16-way L2 cache > cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16 > scmi0 at mainbus0: SCMI 2.0 > "shmem" at mainbus0 not configured > "fit-images" at mainbus0 not configured > "firmware" at mainbus0 not configured > agtimer0 at mainbus0: 24000 kHz > "clock-xin24m" at mainbus0 not configured > "clock-gmac50m" at mainbus0 not configured > simplebus0 at mainbus0: "soc" > ampintc0 at simplebus0 nirq 224, ncpu 4: "interrupt-controller" > syscon0 at simplebus0: "qos" > syscon1 at simplebus0: "qos" > syscon2 at simplebus0: "qos" > syscon3 at simplebus0: "qos" > syscon4 at simplebus0: "qos" > syscon5 at simplebus0: "qos" > syscon6 at simplebus0: "qos" > syscon7 at simplebus0: "qos" > syscon8 at simplebus0: "qos" > syscon9 at simplebus0: "qos" > syscon10 at simplebus0: "qos" > syscon11 at simplebus0: "qos" > syscon12 at simplebus0: "qos" > syscon13 at simplebus0: "qos" > syscon14 at simplebus0: "qos" > syscon15 at simplebus0: "qos" > syscon16 at simplebus0: "qos" > syscon17 at simplebus0: "qos" > syscon18 at simplebus0: "qos" > syscon19 at simplebus0: "qos" > syscon20 at simplebus0: "qos" > syscon21 at simplebus0: "qos" > syscon22 at simplebus0: "qos" > syscon23 at simplebus0: "qos" > syscon24 at simplebus0: "qos" > syscon25 at simplebus0: "qos" > syscon26 at simplebus0: "qos" > syscon27 at simplebus0: "qos" > syscon28 at simplebus0: "qos" > syscon29 at simplebus0: "qos" > syscon30 at simplebus0: "qos" > syscon31 at simplebus0: "qos" > syscon32 at simplebus0: "syscon" > syscon33 at simplebus0: "syscon" > syscon34 at simplebus0: "syscon" > ehci0 at simplebus0 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev > 2.00/1.00 addr 1 > ohci0 at simplebus0: version 1.0 > "clock-controller" at simplebus0 not configured > com0 at simplebus0: dw16550, 64 byte fifo > com0: console > rkiic0 at simplebus0 > iic0 at rkiic0 > "belling,bl24c16a" at iic0 addr 0x50 not configured > rkpwm0 at simplebus0: no clock > rkpwm1 at simplebus0: no clock > "adc" at simplebus0 not configured > dwqe0 at simplebus0: unknown controller at 0xffbe0000 > dwmshc0 at simplebus0 > dwmshc0: SDHC 4.20, 200 MHz base clock > sdmmc0 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma > dwmmc0 at simplebus0: 25 MHz base clock > sdmmc1 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma > "dma-controller" at simplebus0 not configured > "usb2phy" at simplebus0 not configured > "pinctrl" at simplebus0 not configured > "rng" at simplebus0 not configured > "nvmem" at simplebus0 not configured > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev > 1.00/1.00 addr 1 > "adc-keys" at mainbus0 not configured > "gpio-keys" at mainbus0 not configured > "leds" at mainbus0 not configured > "regulator-0v9-vdd" at mainbus0 not configured > "regulator-1v1-vcc-ddr" at mainbus0 not configured > "regulator-1v8-vcc" at mainbus0 not configured > "regulator-3v3-vcc" at mainbus0 not configured > "regulator-5v0-vcc-sys" at mainbus0 not configured > "regulator-5v0-vcc-usb20" at mainbus0 not configured > "regulator-vccio-sd" at mainbus0 not configured > "regulator-vdd-arm" at mainbus0 not configured > "regulator-vdd-logic" at mainbus0 not configured > "binman" at mainbus0 not configured > "dmc" at mainbus0 not configured > sdmmc0: can't identify card > sdmmc0: no functions > scsibus0 at sdmmc1: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable > sd0: 15173MB, 512 bytes/sector, 31074304 sectors > softraid0 at root > scsibus1 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > WARNING: CHECK AND RESET THE DATE! > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > > Next is trying 7.7 snapshots > > -- > Vincent Legoll
