That last line is the same when I boot. But this picture seems to tell me that you have hooked up an HDMI screen.
To see the full boot you need to wire up the debug uart via an rs232 converter and use terminal software on some other computer. See the Olimex manual. Once X is enabled you will see this on the HDMI output and a while later the X login screen. j. On Thu, Nov 17, 2022 at 3:07 PM Sagar Acharya <sagaracha...@tutanota.com> wrote: > I face the same issue. Attaching image alongside. > Thanking you > Sagar Acharya > > > 17 Nov 2022, 18:31 by jan.de.kr...@gmail.com: > > > Yes, it is. > > j. > > > > > > On Thu, Nov 17, 2022 at 1:40 PM Sagar Acharya <sagaracha...@tutanota.com > > > > wrote: > > > >> I'll try it out. I was assuming that since cubieboard also has A20, > things > >> would work straightaway. Are device trees same across GNU/Linux and > OpenBSD? > >> > >> Thanking you > >> Sagar Acharya > >> > >> > >> Nov 17, 2022, 11:42 by jan.de.kr...@gmail.com: > >> > >> > I am running armv7/7.2 on this board. > >> > This is how I got it to run: > >> > > >> > from one of the images at > >> > > >> > https://images.olimex.com/release/a20/ > >> > > >> > you extract > >> > /usr/lib/linux-image-5.10.105-olimex/sun7i-a20-olinuxino-lime2.dtb > (or > >> the > >> > other one if your board is that way) > >> > > >> > I put it in the root of the EFI (dos) partition, which is 'p1' on my > >> image. > >> > > >> > and you extract > >> > /usr/lib/u-boot-olinuxino/a20-olinuxino/u-boot-sunxi-with-spl.bin > >> > > >> > it must go onto the image you created for bsd, in the usual place. > >> > j. > >> > > >> > On Thu, Nov 17, 2022 at 10:46 AM Sagar Acharya < > >> sagaracha...@tutanota.com> > >> > wrote: > >> > > >> >> I finally recognized the beauty of OpenBSD with extremely easy > configs > >> of > >> >> OpenSMTPD, doas, xenocara, and many more such softwares. I have been > a > >> dev > >> >> at Hyperbola soon to be HyperbolaBSD. > >> >> > >> >> I was trying to install OpenBSD Lime2. I tried flashing cubieboard > image > >> >> of miniroot followed by flashing u-boot as shown in installation > >> >> instructions. I built a fresh binary from 2022.10 release of u-boot. > >> >> > >> >> dd if=miniroot-cubie.img of=/dev/sda bs=1M conv=sync > >> >> dd if=u-boot-sunxi-with-spl.bin of=/dev/sda bs=1024 seek=8 > >> >> > >> >> u-boot tries to search for /etc/random.seed which it doesn't find. > There > >> >> are just 2 files, bsd and bsd.mp . After the prompt, > >> >> "EHCI fails to shut down host controller", a completely black screen > >> turns > >> >> up. So, I'm unable to get the kernel booted. Kindly help. > >> >> > >> >> Thanking you > >> >> Sagar Acharya > >> >> > >>
