On Mon, Jan 10, 2022 at 10:33:54PM -0300, Crystal Kolipe wrote:
> On Mon, Jan 10, 2022 at 04:09:03PM -0300, Crystal Kolipe wrote:
> > On Mon, Jan 10, 2022 at 06:55:57PM +0100, Mark Kettenis wrote:
> > > > Date: Mon, 10 Jan 2022 18:35:05 +0100
> > > > From: Patrick Wildt <patr...@blueri.se>
> > > >
> > > > Am Mon, Jan 10, 2022 at 07:42:12PM +0900 schrieb SASANO Takayoshi:
> > > > > Hi,
> > > > >
> > > > > To change AXP80x into RSB mode, put 0x7c value to register 0x3e.
> > > > > The value defined RSB_DMCR_DEVICE_MODE_DATA in sxirsb.c works
> > > > > 0x7e to the register. It needs to be fixed.
> > > > >
> > > > > At least my Allwinner H616 with AXP305 works good with fixed value.
> > > >
> > > > Yeah, that definitely seems like a bug. Unless anyone reports a
> > > > regression, that's OK with me and definitely the correct fix.
> > >
> > > A64 + AXP803 works fine with this diff on the pinebook, and this
> > > matches the Linux code.
> > >
> > > ok kettenis@
> > >
> > > > I wonder if that fixes the machine from Pinephone thread?
> > >
> > > Me too.
> >
> > I'm wondering that too, but I've not in the office at the moment to
> > test it. I'll try to test either late tonight or tomorrow and report
> > back.
>
> OK, I couldn't resist testing tonight, and I'm pleased that I did :)
>
> I can now successfully boot an MP kernel, sxirsb seems to work as
> expected, axppmic attaches and seems to report plausible data, and
> frequency scaling works:
>
> With AC connected:
>
> hw.sensors.axppmic0.temp0=46.80 degC
> hw.sensors.axppmic0.volt0=3.95 VDC (battery voltage)
> hw.sensors.axppmic0.current0=0.00 A (battery charging current)
> hw.sensors.axppmic0.current1=0.04 A (battery discharging current)
> hw.sensors.axppmic0.amphour0=0.00 Ah (battery maximum capacity), WARNING
> hw.sensors.axppmic0.amphour1=0.00 Ah (battery current capacity), WARNING
> hw.sensors.axppmic0.indicator0=On (ACIN), OK
> hw.sensors.axppmic0.indicator1=On (VBUS), OK
> hw.sensors.axppmic0.indicator2=On (battery present), OK
> hw.sensors.axppmic0.indicator3=Off (battery charging)
> hw.sensors.axppmic0.percent0=68.00% (battery percent), OK
> hw.sensors.sxitemp0.temp0=29.91 degC (CPU)
> hw.sensors.sxitemp0.temp1=29.44 degC (GPU)
> hw.sensors.sxitemp0.temp2=30.26 degC
>
> With AC disconnected, using battery power:
>
> hw.sensors.axppmic0.temp0=43.83 degC
> hw.sensors.axppmic0.volt0=3.83 VDC (battery voltage)
> hw.sensors.axppmic0.current0=0.00 A (battery charging current)
> hw.sensors.axppmic0.current1=0.59 A (battery discharging current)
> hw.sensors.axppmic0.amphour0=0.00 Ah (battery maximum capacity), WARNING
> hw.sensors.axppmic0.amphour1=0.00 Ah (battery current capacity), WARNING
> hw.sensors.axppmic0.indicator0=Off (ACIN)
> hw.sensors.axppmic0.indicator1=Off (VBUS)
> hw.sensors.axppmic0.indicator2=On (battery present), OK
> hw.sensors.axppmic0.indicator3=Off (battery charging)
> hw.sensors.axppmic0.percent0=68.00% (battery percent), OK
> hw.sensors.sxitemp0.temp0=29.79 degC (CPU)
> hw.sensors.sxitemp0.temp1=29.56 degC (GPU)
> hw.sensors.sxitemp0.temp2=29.91 degC
>
> The battery level seems plausible, as it was ~92% before starting
> tonight's fresh re-install.
>
> The battery is not charging, but this is expected, right? Surely we need to
> explicitly configure the charging current via the AXP803 PMIC?
>
> Also, the zero values for battery maximum capacity and battery current
> capacity are obviously wrong, but I'm assuming that the battery simply does
> not supply this information.
>
> hw.cpuspeed=816
> hw.setperf=34
>
> phone# apm
> Battery state: unknown, 0% remaining, unknown life estimate
> A/C adapter state: not known
> Performance adjustment mode: manual (816 MHz)
>
> phone# sysctl hw.setperf=100
> hw.setperf: 34 -> 100
>
> phone# apm
> Battery state: unknown, 0% remaining, unknown life estimate
> A/C adapter state: not known
> Performance adjustment mode: manual (1152 MHz)
>
> Overall, though, things are looking good!
>
> My _phone_ runs OpenBSD!!! :-)
Can you try this?
diff --git a/sys/dev/fdt/axppmic.c b/sys/dev/fdt/axppmic.c
index 7e2b0c99942..2a3497f6755 100644
--- a/sys/dev/fdt/axppmic.c
+++ b/sys/dev/fdt/axppmic.c
@@ -36,6 +36,8 @@ extern void (*powerdownfn)(void);
#define AXP209_ADC_EN1_ACIN (3 << 4)
#define AXP209_ADC_EN1_VBUS (3 << 2)
+#define AXP803_BC_MOD_GLOBAL 0x2c
+#define AXP803_BC_MOD_GLOBAL_EN (1 << 0)
#define AXP803_BAT_CAP_WARN 0xe6
#define AXP803_BAT_CAP_WARN_LV1 0xf0
#define AXP803_BAT_CAP_WARN_LV1BASE 5
@@ -554,6 +556,15 @@ axppmic_attach_node(struct axppmic_softc *sc, int node)
if (OF_is_compatible(node, "x-powers,axp803-battery-power-supply"))
sc->sc_sensdata = axp803_battery_sensdata;
+
+ if (OF_is_compatible(node, "x-powers,axp803-usb-power-supply")) {
+ uint8_t reg;
+
+ /* Turn on battery charging module. */
+ reg = axppmic_read_reg(sc, AXP803_BC_MOD_GLOBAL);
+ reg |= AXP803_BC_MOD_GLOBAL_EN;
+ axppmic_write_reg(sc, AXP803_BC_MOD_GLOBAL, reg);
+ }
}
/* Regulators */
