That hint helped, but I'm not quite there. To be explicit: By pressing <esc> and getting to the Raspberry Pi 4 UEFI configuration v1.16 (is that what it is called?) There was a setting to choose: <ACPI> <ACPI> + <devicetree> <devicetree>
I set that to <devicetree> My dmesg is now better: all the "BCM28XX not configured" are gone New dmesg below. But, I still don't see bwfm in the dmesg. If you have some pity on a noob, and know the next step that I am missing in order to get bwfm wifi, I would greatly appreciate it. Thanks very much dmesg: OpenBSD 6.7 (GENERIC.MP) #5: Tue Jul 21 13:15:47 MDT 2020 r...@syspatch-67-arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP real mem = 3074015232 (2931MB) avail mem = 2949476352 (2812MB) mainbus0 at root: Raspberry Pi 4 Model B Rev 1.2 cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3 cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu0: 1024KB 64b/line 16-way L2 cache efi0 at mainbus0: UEFI 2.7 efi0: https://github.com/pftf/RPi4 rev 0x10000 smbios0 at efi0: SMBIOS 3.3.0 smbios0: vendor https://github.com/pftf/RPi4 version "UEFI Firmware v1.16" date Jun 18 2020 12:20:53 smbios0: Sony UK Raspberry Pi 4 Model B apm0 at mainbus0 psci0 at mainbus0: PSCI 1.1, SMCCC 1.2 "system" at mainbus0 not configured "axi" at mainbus0 not configured simplebus0 at mainbus0: "soc" bcmclock0 at simplebus0 bcmmbox0 at simplebus0 bcmgpio0 at simplebus0 bcmaux0 at simplebus0 ampintc0 at simplebus0 nirq 256, ncpu 4 ipi: 0, 1: "interrupt-controller" syscon0 at simplebus0: "avs-monitor" "thermal" at syscon0 not configured bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 "timer" at simplebus0 not configured bcmirng0 at simplebus0 pluart0 at simplebus0: console com0 at simplebus0: ns16550, no working fifo "local_intc" at simplebus0 not configured bcmdog0 at simplebus0 "clock" at simplebus0 not configured simplebus1 at simplebus0: "firmware" "gpio" at simplebus1 not configured "clocks" at simplebus1 not configured "power" at simplebus0 not configured "mailbox" at simplebus0 not configured sdhc0 at simplebus0 sdhc0: SDHC 3.0, 250 MHz base clock sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed "gpiomem" at simplebus0 not configured "fb" at simplebus0 not configured "vcsm" at simplebus0 not configured "clocks" at mainbus0 not configured "phy" at mainbus0 not configured "clk-108M" at mainbus0 not configured "arm-pmu" at mainbus0 not configured agtimer0 at mainbus0: tick rate 54000 KHz simplebus2 at mainbus0: "scb" bcmpcie0 at simplebus2 pci0 at bcmpcie0 ppb0 at pci0 dev 0 function 0 "Broadcom BCM2711" rev 0x10 pci1 at ppb0 bus 1 xhci0 at pci1 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: intx, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 addr 1 bse0 at simplebus2: address dc:a6:32:a6:e9:a0 brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2 "dma" at simplebus2 not configured "hevc-decoder" at simplebus2 not configured "rpivid-local-intc" at simplebus2 not configured "h264-decoder" at simplebus2 not configured "vp9-decoder" at simplebus2 not configured "leds" at mainbus0 not configured "sd_io_1v8_reg" at mainbus0 not configured "fixedregulator_3v3" at mainbus0 not configured "fixedregulator_5v0" at mainbus0 not configured simplebus3 at mainbus0: "v3dbus" simplebus4 at mainbus0: "emmc2bus" sdhc1 at simplebus4 sdhc1: SDHC 3.0, 100 MHz base clock sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, dma "sd_vcc_reg" at mainbus0 not configured simplefb0 at mainbus0: 1920x1080, 32bpp wsdisplay0 at simplefb0 mux 1 wsdisplay0: screen 0-5 added (std, vt100 emulation) cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3 cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu1: 1024KB 64b/line 16-way L2 cache cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3 cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu2: 1024KB 64b/line 16-way L2 cache cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3 cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu3: 1024KB 64b/line 16-way L2 cache sdmmc1: can't enable card uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev 2.10/4.21 addr 2 uhub2 at uhub1 port 2 configuration 1 interface 0 "VIA Labs USB 2.0 HUB " rev 2.00/85.70 addr 3 uhidev0 at uhub2 port 3 configuration 1 interface 0 "Cherry Mikroschalter product 0x0011" rev 2.00/1.00 addr 4 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd0 at ukbd0 mux 1 wskbd0: connecting to wsdisplay0 scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SC16G, 0080> removable sd0: 15193MB, 512 bytes/sector, 31116288 sectors uhidev1 at uhub2 port 4 configuration 1 interface 0 "Logitech USB Laser Mouse" rev 2.00/31.00 addr 5 uhidev1: iclass 3/1 ums0 at uhidev1: 8 buttons, Z and W dir wsmouse0 at ums0 mux 0 umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Ultra Fit" rev 3.20/1.00 addr 6 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable serial.07815583810767a962aa sd1: 117360MB, 512 bytes/sector, 240353280 sectors uhub3 at uhub0 port 3 configuration 1 interface 0 "VLI Labs, Inc. USB 3.0 HUB " rev 3.00/85.74 addr 7 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets bootfile: sd0a:/bsd boot device: sd0 root on sd1a (c7f9bf89898c1f38.a) swap on sd1b dump on sd1b WARNING: clock lost 52 days WARNING: CHECK AND RESET THE DATE! gpio0 at bcmgpio0: 58 pins On Saturday, August 8, 2020, 4:37:44 PM EDT, Stuart Henderson <s...@spacehopper.org> wrote: > >bwfm works, set uefi to device tree instead of acpi mode. Not sure about >audio, I haven't tried it. > > >On 8 August 2020 21:15:16 Doug Moss <dougmoss...@yahoo.com> wrote: >> >> 1. My thanks to all who have worked to get OpenBSD on Raspberry Pi ARM64 >> With install instructions, and UEFI firmware, I was able to get it up and >> running. >> Thanks. >> >> 2. The Raspberry Pi 4 is said to have onboard wifi, with a Cypress CYW43455 >> chip. >> I don't see it on my dmesg. >> Is it not supported yet, or is there something wrong with my Raspberry Pi 4 >> board? >> There were some things online about the bwfm driver working for this Cypress >> chip? >> >> 3. USB for mouse/keyboard/storage devices seems to work. >> USB audio seems to show up in dmesg, but >> USB audio does not work for me. >> aucat with a WAV file produces staticky noise, with almost the rhythm of the >> WAV file music. >> Known problem? or something I am messing up? >> >> Thanks <snip dmesg>
