That hint helped, but I'm not quite there.
To be explicit:
By pressing <esc> and getting to the Raspberry Pi 4 UEFI configuration v1.16
(is that what it is called?)
There was a setting to choose:
<ACPI>
<ACPI> + <devicetree>
<devicetree>
I set that to <devicetree>
My dmesg is now better: all the "BCM28XX not configured" are gone
New dmesg below.
But, I still don't see bwfm in the dmesg.
If you have some pity on a noob, and know the next step that I am missing
in order to get
bwfm wifi, I would greatly appreciate it.
Thanks very much
dmesg:
OpenBSD 6.7 (GENERIC.MP) #5: Tue Jul 21 13:15:47 MDT 2020
r...@syspatch-67-arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 3074015232 (2931MB)
avail mem = 2949476352 (2812MB)
mainbus0 at root: Raspberry Pi 4 Model B Rev 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A72 r0p3
cpu0: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu0: 1024KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: https://github.com/pftf/RPi4 rev 0x10000
smbios0 at efi0: SMBIOS 3.3.0
smbios0: vendor https://github.com/pftf/RPi4 version "UEFI Firmware v1.16"
date Jun 18 2020 12:20:53
smbios0: Sony UK Raspberry Pi 4 Model B
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2
"system" at mainbus0 not configured
"axi" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
bcmclock0 at simplebus0
bcmmbox0 at simplebus0
bcmgpio0 at simplebus0
bcmaux0 at simplebus0
ampintc0 at simplebus0 nirq 256, ncpu 4 ipi: 0, 1: "interrupt-controller"
syscon0 at simplebus0: "avs-monitor"
"thermal" at syscon0 not configured
bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7
"timer" at simplebus0 not configured
bcmirng0 at simplebus0
pluart0 at simplebus0: console
com0 at simplebus0: ns16550, no working fifo
"local_intc" at simplebus0 not configured
bcmdog0 at simplebus0
"clock" at simplebus0 not configured
simplebus1 at simplebus0: "firmware"
"gpio" at simplebus1 not configured
"clocks" at simplebus1 not configured
"power" at simplebus0 not configured
"mailbox" at simplebus0 not configured
sdhc0 at simplebus0
sdhc0: SDHC 3.0, 250 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed
"gpiomem" at simplebus0 not configured
"fb" at simplebus0 not configured
"vcsm" at simplebus0 not configured
"clocks" at mainbus0 not configured
"phy" at mainbus0 not configured
"clk-108M" at mainbus0 not configured
"arm-pmu" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 54000 KHz
simplebus2 at mainbus0: "scb"
bcmpcie0 at simplebus2
pci0 at bcmpcie0
ppb0 at pci0 dev 0 function 0 "Broadcom BCM2711" rev 0x10
pci1 at ppb0 bus 1
xhci0 at pci1 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: intx, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00
addr 1
bse0 at simplebus2: address dc:a6:32:a6:e9:a0
brgphy0 at bse0 phy 1: BCM54210E 10/100/1000baseT PHY, rev. 2
"dma" at simplebus2 not configured
"hevc-decoder" at simplebus2 not configured
"rpivid-local-intc" at simplebus2 not configured
"h264-decoder" at simplebus2 not configured
"vp9-decoder" at simplebus2 not configured
"leds" at mainbus0 not configured
"sd_io_1v8_reg" at mainbus0 not configured
"fixedregulator_3v3" at mainbus0 not configured
"fixedregulator_5v0" at mainbus0 not configured
simplebus3 at mainbus0: "v3dbus"
simplebus4 at mainbus0: "emmc2bus"
sdhc1 at simplebus4
sdhc1: SDHC 3.0, 100 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, dma
"sd_vcc_reg" at mainbus0 not configured
simplefb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
cpu1 at mainbus0 mpidr 1: ARM Cortex-A72 r0p3
cpu1: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu1: 1024KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A72 r0p3
cpu2: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu2: 1024KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A72 r0p3
cpu3: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache
cpu3: 1024KB 64b/line 16-way L2 cache
sdmmc1: can't enable card
uhub1 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev
2.10/4.21 addr 2
uhub2 at uhub1 port 2 configuration 1 interface 0 "VIA Labs USB 2.0 HUB
" rev 2.00/85.70 addr 3
uhidev0 at uhub2 port 3 configuration 1 interface 0 "Cherry Mikroschalter
product 0x0011" rev 2.00/1.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SC16G, 0080> removable
sd0: 15193MB, 512 bytes/sector, 31116288 sectors
uhidev1 at uhub2 port 4 configuration 1 interface 0 "Logitech USB Laser
Mouse" rev 2.00/31.00 addr 5
uhidev1: iclass 3/1
ums0 at uhidev1: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Ultra Fit" rev
3.20/1.00 addr 6
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable
serial.07815583810767a962aa
sd1: 117360MB, 512 bytes/sector, 240353280 sectors
uhub3 at uhub0 port 3 configuration 1 interface 0 "VLI Labs, Inc. USB 3.0 HUB
" rev 3.00/85.74 addr 7
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd1a (c7f9bf89898c1f38.a) swap on sd1b dump on sd1b
WARNING: clock lost 52 days
WARNING: CHECK AND RESET THE DATE!
gpio0 at bcmgpio0: 58 pins
On Saturday, August 8, 2020, 4:37:44 PM EDT, Stuart Henderson
<s...@spacehopper.org> wrote:
bwfm works, set uefi to device tree instead of acpi mode. Not sure about
audio, I haven't tried it.
>
On 8 August 2020 21:15:16 Doug Moss <dougmoss...@yahoo.com> wrote:
1. My thanks to all who have worked to get OpenBSD on Raspberry Pi ARM64
With install instructions, and UEFI firmware, I was able to get it up and
running.
Thanks.
2. The Raspberry Pi 4 is said to have onboard wifi, with a Cypress CYW43455
chip.
I don't see it on my dmesg.
Is it not supported yet, or is there something wrong with my Raspberry Pi 4
board?
There were some things online about the bwfm driver working for this
Cypress chip?
3. USB for mouse/keyboard/storage devices seems to work.
USB audio seems to show up in dmesg, but
USB audio does not work for me.
aucat with a WAV file produces staticky noise, with almost the rhythm of the
WAV file music.
Known problem? or something I am messing up?
Thanks
<snip dmesg>
