On Jan 29 15:29:07, j...@jsg.id.au wrote:
> > > > U-Boot SPL 2017.03 (Mar 26 2017 - 16:58:08)
> > > > Trying to boot from MMC2
> > > > MMC partition switch failed
> > > > *** Warning - MMC partition switch failed, using default environment
> > > > reading u-boot.img
> > > > reading u-boot.img
> > > > U-Boot 2017.03 (Mar 26 2017 - 16:58:08 -0600)
> Why are you using such an old version of U-Boot?
>
> The latest armv7 snapshot at the time of writing
> OpenBSD 6.6-current (GENERIC) #255: Mon Jan 27 21:28:37 MST 2020
> dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC
>
> works on BBB with both U-Boot 2019.01 and U-Boot 2020.01 here, with
> >> OpenBSD/armv7 BOOTARM 1.9
Now I'm using the one that comes with 6.6 (script below):
U-Boot SPL 2019.01 (Apr 09 2019 - 23:15:32 +0200)
>> OpenBSD/armv7 BOOTARM 1.6
Do these get upgraded with OpenBSD upgrades?
(I keep upgrading the machine quite regularly.)
Jan
U-Boot SPL 2019.01 (Apr 09 2019 - 23:15:32 +0200)
Trying to boot from MMC2
Loading Environment from FAT... Card did not respond to voltage select!
U-Boot 2019.01 (Apr 09 2019 - 23:15:32 +0200)
CPU : AM335X-GP rev 2.0
Model: TI AM335x BeagleBone Black
DRAM: 512 MiB
musb - not able to bind usb peripheral node
NAND: 0 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from FAT... MMC: no card present
No USB device found
<ethaddr> not set. Validating first E-fuse MAC
Net: eth0: ethernet@4a100000
Hit any key to stop autoboot: 0
MMC: no card present
MMC: no card present
MMC: no card present
MMC: no card present
MMC: no card present
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
34886 bytes read in 6 ms (5.5 MiB/s)
r999;999H6nScanning disks onnusb...i/boot/bootarm.efi
Disk usb0 not ready
Disk usb1 not ready
Disk usb2 not ready
Disk usb3 not ready
Scanning disks on mmc...
MMC: no card present
MMC Device 2 not found
MMC Device 3 not found
Found 3 disks
88176 bytes read in 13 ms (6.5 MiB/s)
## Starting EFI application at 82000000 ...
>> OpenBSD/armv7 BOOTARM 1.6
boot>
booting sd0a:/bsd: 4600144+675192+248624+564284-[302515+120+317408+281715]=0x0
OpenBSD/armv7 booting ...
arg0 0xc09abc50 arg1 0xe05 arg2 0x87ef4000
Allocating page tables
IRQ stack: p0x809da000 v0xc09da000
ABT stack: p0x809db000 v0xc09db000
UND stack: p0x809dc000 v0xc09dc000
SVC stack: p0x809dd000 v0xc09dd000
Creating L1 page table at 0x809ac000
Mapping kernel
Constructing L2 page tables
undefined page type 0x2 pa 0x80000000 va 0x80000000 pages 0x2000 attr 0x8
type 0x7 pa 0x82000000 va 0x80000000 pages 0x5ef4 attr 0x8
type 0x6 pa 0x87ef4000 va 0x87ef4000 pages 0x18 attr 0x8000000000000008
type 0x7 pa 0x87f0c000 va 0x80000000 pages 0x14899 attr 0x8
type 0x2 pa 0x9c7a5000 va 0x9c7a5000 pages 0x667 attr 0x8
type 0x4 pa 0x9ce0c000 va 0x9ce0c000 pages 0x1 attr 0x8
type 0x2 pa 0x9ce0d000 va 0x9ce0d000 pages 0x100 attr 0x8
type 0x1 pa 0x9cf0d000 va 0x9cf0d000 pages 0x16 attr 0x8
type 0x6 pa 0x9cf23000 va 0x9cf23000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0x9cf24000 va 0x9cf1f000 pages 0x4 attr 0x8
type 0x6 pa 0x9cf28000 va 0x9cf28000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0x9cf29000 va 0x9cf29000 pages 0x2 attr 0x8
type 0x2 pa 0x9cf2b000 va 0x9cf2b000 pages 0x302c attr 0x8
type 0x5 pa 0x9ff57000 va 0x9ff57000 pages 0x2 attr 0x8000000000000008
type 0x2 pa 0x9ff59000 va 0x9cf2b000 pages 0xa7 attr 0x8
pmap [ using 902372 bytes of bsd ELF symbol table ]
board type: 3589
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.6 (GENERIC) #226: Sat Oct 12 08:36:17 MDT 2019
dera...@armv7.openbsd.org:/usr/src/sys/arch/armv7/compile/GENERIC
real mem = 477679616 (455MB)
avail mem = 457969664 (436MB)
mainbus0 at root: TI AM335x BeagleBone Black
cpu0 at mainbus0 mpidr 0: ARM Cortex-A8 r3p2
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 256KB 64b/line 8-way L2 cache
omap0 at mainbus0
prcm0 at omap0 rev 0.2
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
simplebus0 at mainbus0: "ocp"
simplebus1 at simplebus0: "l4_wkup"
"wkup_m3" at simplebus1 not configured
simplebus2 at simplebus1: "prcm"
"l4_per_cm" at simplebus2 not configured
"l4_wkup_cm" at simplebus2 not configured
"mpu_cm" at simplebus2 not configured
"l4_rtc_cm" at simplebus2 not configured
"gfx_l3_cm" at simplebus2 not configured
"l4_cefuse_cm" at simplebus2 not configured
simplebus3 at simplebus1: "scm"
syscon0 at simplebus3: "scm_conf"
pinctrl0 at simplebus3
"wkup_m3_ipc" at simplebus3 not configured
"dma-router" at simplebus3 not configured
intc0 at simplebus0 rev 5.0
"edma" at simplebus0 not configured
"tptc" at simplebus0 not configured
"tptc" at simplebus0 not configured
"tptc" at simplebus0 not configured
omgpio0 at simplebus0: rev 0.1
gpio0 at omgpio0: 32 pins
omgpio1 at simplebus0: rev 0.1
gpio1 at omgpio1: 32 pins
omgpio2 at simplebus0: rev 0.1
gpio2 at omgpio2: 32 pins
omgpio3 at simplebus0: rev 0.1
gpio3 at omgpio3: 32 pins
com0 at simplebus0: ti16750, 64 byte fifo
com0: console
tiiic0 at simplebus0 rev 0.11
iic0 at tiiic0
"ti,tps65217" at iic0 addr 0x24 not configured
"atmel,24c256" at iic0 addr 0x50 not configured
nxphdmi0 at iic0 addr 0x70: rev 0x0301
nxphdmi0: no display detected
tiiic1 at simplebus0 rev 0.11
iic1 at tiiic1
"atmel,24c256" at iic1 addr 0x54 not configured
"atmel,24c256" at iic1 addr 0x55 not configured
"atmel,24c256" at iic1 addr 0x56 not configured
"atmel,24c256" at iic1 addr 0x57 not configured
ommmc0 at simplebus0
sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
ommmc1 at simplebus0
sdmmc1 at ommmc1: 1-bit
"spinlock" at simplebus0 not configured
omdog0 at simplebus0 rev 0.1
"mailbox" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"rtc" at simplebus0 not configured
"usb" at simplebus0 not configured
cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0001f0, model 0x000f
"ocmcram" at simplebus0 not configured
amdisplay0 at simplebus0
amdisplay0: no display attached.
"emif" at simplebus0 not configured
"sham" at simplebus0 not configured
"aes" at simplebus0 not configured
"mcasp" at simplebus0 not configured
"rng" at simplebus0 not configured
sdmmc0: can't enable card
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, MMC02G, 0000> removable
sd0: 1832MB, 512 bytes/sector, 3751936 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (252e8aea1029b647.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
Automatic boot in progress: starting file system checks.
/dev/sd0a (252e8aea1029b647.a): file system is clean; not checking
pf enabled
starting network
cpsw0: 192.168.55.10 lease accepted from 192.168.55.1 (28:f1:0e:26:94:75)
reordering libraries: done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Sun Oct 13 10:55:35 CEST 2019
OpenBSD/armv7 (bbb.stare.cz) (console)
login:
