Last good dmesg at the bottom.

On Jan 28 15:03:33, h...@stare.cz wrote:
> After a failed sysupgrade that reboots midway
> https://marc.info/?l=openbsd-misc&m=157856684125898&w=2
> my BBB will not boot into anything:
> 
> 
> U-Boot SPL 2017.03 (Mar 26 2017 - 16:58:08)
> Trying to boot from MMC2
> MMC partition switch failed
> *** Warning - MMC partition switch failed, using default environment
> 
> reading u-boot.img
> reading u-boot.img
> 
> 
> U-Boot 2017.03 (Mar 26 2017 - 16:58:08 -0600)
> 
> CPU  : AM335X-GP rev 2.0
> I2C:   ready
> DRAM:  512 MiB
> MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
> *** Warning - bad CRC, using default environment
> 
> <ethaddr> not set. Validating first E-fuse MAC
> Net:   cpsw, usb_ether
> Press SPACE to abort autoboot in 2 seconds
> switch to partitions #0, OK
> mmc0 is current device
> SD/MMC found on device 0
> reading boot.scr
> ** Unable to read file boot.scr **
> reading uEnv.txt
> ** Unable to read file uEnv.txt **
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> reading /am335x-boneblack.dtb
> 34886 bytes read in 9 ms (3.7 MiB/s)
> Found EFI removable media binary efi/boot/bootarm.efi
> reading efi/boot/bootarm.efi
> 100876 bytes read in 17 ms (5.7 MiB/s)
> ## Starting EFI application at 82000000 ...
> Scanning disks on usb...
> Scanning disks on mmc...
> MMC Device 2 not found
> MMC Device 3 not found
> Found 6 disks
> data abort
> pc : [<9cf19854>]        lr : [<9cf1984c>]
> reloc pc : [<7d7c8854>]          lr : [<7d7c884c>]
> sp : 9df2f908  ip : 9df2fdf0   fp : 9df2fe10
> r10: 00000000  r9 : 00000000   r8 : 9ce16018
> r7 : 9df2fbf0  r6 : 9ff7c6c1   r5 : ffffff00  r4 : 9ce14000
> r3 : 000000aa  r2 : 00000000   r1 : 9ce14200  r0 : 9df2fbf0
> Flags: nZCv  IRQs off  FIQs on        Mode SVC_32
> Resetting CPU ...
> 
> resetting ...
> 
> 
> The very same happens with a brand new SD card
> and the current miniroot-am335x-66.fs
> 
> I have no idea what the problem is.
> Can anyone push me in the right direction please?
> 
>       Jan
> 


OpenBSD 6.6-current (GENERIC) #0: Mon Jan 13 14:45:16 CET 2020
    h...@bbb.stare.cz:/usr/src/sys/arch/armv7/compile/GENERIC
real mem  = 477814784 (455MB)
avail mem = 458117120 (436MB)
mainbus0 at root: TI AM335x BeagleBone Black
cpu0 at mainbus0 mpidr 0: ARM Cortex-A8 r3p2
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 256KB 64b/line 8-way L2 cache
omap0 at mainbus0
prcm0 at omap0 rev 0.2
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
simplebus0 at mainbus0: "ocp"
simplebus1 at simplebus0: "l4_wkup"
"wkup_m3" at simplebus1 not configured
simplebus2 at simplebus1: "prcm"
"l4_per_cm" at simplebus2 not configured
"l4_wkup_cm" at simplebus2 not configured
"mpu_cm" at simplebus2 not configured
"l4_rtc_cm" at simplebus2 not configured
"gfx_l3_cm" at simplebus2 not configured
"l4_cefuse_cm" at simplebus2 not configured
simplebus3 at simplebus1: "scm"
syscon0 at simplebus3: "scm_conf"
pinctrl0 at simplebus3
"wkup_m3_ipc" at simplebus3 not configured
"dma-router" at simplebus3 not configured
intc0 at simplebus0 rev 5.0
"edma" at simplebus0 not configured
"tptc" at simplebus0 not configured
"tptc" at simplebus0 not configured
"tptc" at simplebus0 not configured
omgpio0 at simplebus0: rev 0.1
gpio0 at omgpio0: 32 pins
omgpio1 at simplebus0: rev 0.1
gpio1 at omgpio1: 32 pins
omgpio2 at simplebus0: rev 0.1
gpio2 at omgpio2: 32 pins
omgpio3 at simplebus0: rev 0.1
gpio3 at omgpio3: 32 pins
com0 at simplebus0: ti16750, 64 byte fifo
com0: console
tiiic0 at simplebus0 rev 0.11
iic0 at tiiic0
"ti,tps65217" at iic0 addr 0x24 not configured
"atmel,24c256" at iic0 addr 0x50 not configured
nxphdmi0 at iic0 addr 0x70: rev 0x0301
nxphdmi0: no display detected
tiiic1 at simplebus0 rev 0.11
iic1 at tiiic1
"atmel,24c256" at iic1 addr 0x54 not configured
"atmel,24c256" at iic1 addr 0x55 not configured
"atmel,24c256" at iic1 addr 0x56 not configured
"atmel,24c256" at iic1 addr 0x57 not configured
ommmc0 at simplebus0
sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
ommmc1 at simplebus0
sdmmc1 at ommmc1: 1-bit
"spinlock" at simplebus0 not configured
omdog0 at simplebus0 rev 0.1
"mailbox" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"rtc" at simplebus0 not configured
"usb" at simplebus0 not configured
cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 
0x0001f0, model 0x000f
"ocmcram" at simplebus0 not configured
amdisplay0 at simplebus0
amdisplay0: no display attached.
"emif" at simplebus0 not configured
"sham" at simplebus0 not configured
"aes" at simplebus0 not configured
"mcasp" at simplebus0 not configured
"rng" at simplebus0 not configured
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, MMC02G, 0000> removable
sd0: 1832MB, 512 bytes/sector, 3751936 sectors
scsibus1 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SU32G, 0080> removable
sd1: 30436MB, 512 bytes/sector, 62333952 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd1a (93aae518915c8841.a) swap on sd1b dump on sd1b
WARNING: CHECK AND RESET THE DATE!

Reply via email to