On Tue, 2019-11-19 at 22:22 +0100, Olivier Burelli wrote: > Hi stuart, thank for your help. > > My goal : > > _ Pine64 ROCKPro64 4Gb with boot on eMMC (just ordered) > _ LSI Megaraid 9260 + 5 SATA disks ; raid is only for a data home NAS > (not ordered yet) > > Yes, if someone has already tested... it should be appreciated :) > > Effectively no drivers are present in /sys/arch/arm64/conf/GENERIC but > present in i386 arch. > > I hope that the pcie port will work fine : > > _ rkpcie0 at fdt ? > _ pci at rkpcie ? > _ mfi* at pci? # LSI MegaRAID SAS controllers > _ mfii* at pci? # LSI MegaRAID SAS Fusion controllers > _ mpi* at pci? # LSI Logic Message Passing Interface > _ mpii* at pci? # LSI Message Passing Interface II > > --> Maybe I should add them in the GENERIC file. Play, in second, with > the kernel compilation. > > Question : for someone does pcie port running well on ROCKPro64 ?
I have tested a few cards on the rockpro64 and found the following. No issues found with these cards/chipsets: StarTech.com PEXSAT32 2 Port SATA Controller ahci0 at pci1 dev 0 function 0 "Marvell 88SE9128 AHCI" rev 0x20: msi, AHCI 1.2 QNINE NVME PCIe Adapter M.2 2280 w/Samsung 970 EVO nvme0 at pci1 dev 0 function 0 "Samsung SM981/PM981 NVMe" rev 0x00: msix, NVMe 1.3 Works but is somewhat unstable under heavy load: ROCKPro64 PCI-E to Dual SATA-II Interface Card ahci0 at pci1 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x01: msi, AHCI 1.2 Does not work: HighPoint Rocket 640L ahci0 at pci1 dev 0 function 0 "Marvell 88SE9230 AHCI" rev 0x11: msi, AHCI 1.2 Dell PERC 6/ir mpi0 at pci9 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x08: msi Cards that don't work panic when first accessing the PCIe configuration memory during boot. The reason for this is unknown and appears to be an issue with Linux as well: https://github.com/rockchip-linux/kernel/issues/116 Some cards can be made to work by adding an arbitrary delay into the rkpci driver after link training but this is a hack without a root cause known so it is unlikely to be committed. The current driver does not support cards that have PCI bridge's on them as well. -Kurt > Thank you, > > Olivier. > > On 11/19/2019 7:12 PM, Stuart Henderson wrote: > > > > On 2019/11/19 14:27, Olivier Burelli wrote: > > > > > > Hello, > > > > > > For previous versions i checked on https://www.openbsd.org/amd64.html or > > > https://www.openbsd.org/arm64.html to find supported hardware. > > > > > > For example for amd64, i could use a megaraid 9240 RAID adapter. > > > > > > Now i can not find supported RAID Adapters. > > > > > > _ If for amd64, i can use a LSI MEGARAID 9240, may i plug it on arm64 > > > architecture ? > > This sounds like something that somebody who has suitable hardware > > (controller and preconfigured drives) would need to test. > > > > Presumably you won't be able to boot directly from it if it even works > > at all... > > > > > > > > _ Does the base kernel is including the drivers or i have to build the > > > kernel to include it ? > > None are compiled in the GENERIC / GENERIC.MP kernel on arm64. You > > can check this by looking in /sys/arch/arm64/conf/GENERIC. > > > > > > > > _ Where, currently, can i find all RAID adapters supported by OpenBSD ? > > I think it's the union of "man -s 4 -k RAID" and "man -s 4 -k fusion". > > Some of them are old and crappy and are unlikely to work on much other than > > (32-bit) i386. > > > > On any arch, I would restrict myself to the common ones: > > mpi/mpii/mfi/mfii/softraid. (For mpi, some changes that went into > > -current recently make it suck much less).
