Hello,
I bought OrangePi One Plus (Allwinner H6) and tried to boot -current.
Hanged up at attaching a root device, and maybe we have to add some codes to
sxipio(4) and sxiccmu(4).
Here is the log.
----
U-Boot SPL 2019.07 (Sep 04 2019 - 11:18:21 +0900)
DRAM: 1024 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.1(debug):v2.1-604-g3441952f
NOTICE: BL31: Built : 11:13:26, Sep 4 2019
NOTICE: BL31: Detected Allwinner H6 SoC (1728)
NOTICE: BL31: Found U-Boot DTB at 0xc0775d8, model: OrangePi One Plus
INFO: ARM GICv2 driver initialized
NOTICE: PMIC: Probing AXP805
NOTICE: PMIC: AXP805 detected
INFO: BL31: Platform setup done
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x4a000000
INFO: SPSR = 0x3c9
U-Boot 2019.07 (Sep 04 2019 - 11:18:21 +0900) Allwinner Technology
CPU: Allwinner H6 (SUN50I)
Model: OrangePi One Plus
DRAM: 1 GiB
MMC: mmc@4020000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial@5000000
Out: serial@5000000
Err: serial@5000000
Net: No ethernet found.
starting USB...
No working controllers found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk m...@4020000.blk...
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
161090 bytes read in 23 ms (6.7 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 0.19
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 7400836+1595608+520544+844216
[619961+109+862056+523774]=0xd37270
type 0x2 pa 0x40000000 va 0x40000000 pages 0x4000 attr 0x8
type 0x7 pa 0x44000000 va 0x44000000 pages 0x3ef9 attr 0x8
type 0x4 pa 0x47ef9000 va 0x47ef9000 pages 0xe attr 0x8
type 0x7 pa 0x47f07000 va 0x47f07000 pages 0x323ee attr 0x8
type 0x2 pa 0x7a2f5000 va 0x7a2f5000 pages 0xc0f attr 0x8
type 0x1 pa 0x7af04000 va 0x7af04000 pages 0x28 attr 0x8
type 0x0 pa 0x7af2c000 va 0x7af2c000 pages 0x9 attr 0x8
type 0x6 pa 0x7af35000 va 0x3e024be000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0x7af36000 va 0x7af36000 pages 0x1 attr 0x8
type 0x6 pa 0x7af37000 va 0x3e024c0000 pages 0x1 attr 0x8000000000000008
type 0x2 pa 0x7af38000 va 0x7af38000 pages 0x5018 attr 0x8
type 0x5 pa 0x7ff50000 va 0x3e074d9000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0x7ff60000 va 0x7ff60000 pages 0xa0 attr 0x8
[ using 2006872 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.6-beta (GENERIC) #0: Wed Sep 4 15:50:19 JST 2019
r...@obsd-aarch64.uaa.org.uk:/usr/src/sys/arch/arm64/compile/GENERIC
real mem = 976121856 (930MB)
avail mem = 916107264 (873MB)
warning: no entropy supplied by boot loader
mainbus0 at root: OrangePi One Plus
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x20190700
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
"internal-osc-clk" at mainbus0 not configured
"osc24M_clk" at mainbus0 not configured
"osc32k_clk" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
sxisyscon0 at simplebus0
ampintc0 at simplebus0 nirq 192, ncpu 4: "interrupt-controller"
"display-engine" at simplebus0 not configured
"video-codec" at simplebus0 not configured
"clock" at simplebus0 not configured
"sid" at simplebus0 not configured
"pinctrl" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
com0 at simplebus0: ns16550, no working fifo
com0: console
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
ehci0: halt timeout
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
uhub0: no ports, hub ignored
usb0: root device is not a hub
ohci0 at simplebus0: version 0.0
ohci0: unsupported OHCI revision
ehci1 at simplebus0
ehci1: halt timeout
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
uhub1: no ports, hub ignored
usb1: root device is not a hub
ohci1 at simplebus0: version 0.0
ohci1: unsupported OHCI revision
"hdmi-phy" at simplebus0 not configured
"tcon-top" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"clock" at simplebus0 not configured
"interrupt-controller" at simplebus0 not configured
"pinctrl" at simplebus0 not configured
sxitwi0 at simplebus0: unknown clock frequency
"leds" at mainbus0 not configured
"vcc5v" at mainbus0 not configured
"binman" at mainbus0 not configured
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: lookup sd0a:/bsd failed
root device: <-- hanged up here
--
SASANO Takayoshi (JG1UAA) <u...@cvs.openbsd.org>
