I have been able to successfully install OpenBSD Current Aug 06
2019 on the Olimex Teres laptop. It has very similar hardware to
the PineBook, arm64 allwinner, etc. I used u-boot-sunxi-with-spl.bin
from u-boot v2019.07 (teres_i_defconfig) and Arm Trusted Firmware
v2.1. The dtb (sun50i-a64-teres-i.dtb) is from the OpenBSD 6.5-release
ports tree.
To complete kernel initialization from either the install bsd.rd
or bsd from an install, the ohci driver must be disabled. I have
included the serial console output and dmesg of first a boot without
the ohci driver disabled, and then the boot log of my successful
install with ohci disabled. According to linux dmesg or the
sun50i-a64-teres-i.dts, ohci is available so the driver is probed
correctly - but even after several minutes the initialization process
will not continue past the line "ohci0 at simplebus0".
What works: the embedded mmc and external mmc, external usb ports,
the serial line, and if xorg is running, the display. What does
not: wifi (as expected, realtek 8723bs), keyboard and trackpad.
Please let me know if there is anything I can do to help improve
support for this platform. I tried building a DEBUG kernel and
booting with "verbose" from the UKC> prompt but did not find any
useful (afaik) information. I don't know how else to get more verbose
information from the initialization process (add printf's to the
driver code?).
Thanks.
U-Boot SPL 2019.07 (Aug 06 2019 - 22:39:39 +0000)
DRAM: 2048 MiB
Trying to boot from MMC2
NOTICE: BL31: v2.1(release):v2.1
NOTICE: BL31: Built : 22:20:23, Aug 6 2019
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x408a4a0, model: Olimex A64 Teres-I
NOTICE: BL31: PMIC: Detected AXP803 on RSB.
U-Boot 2019.07 (Aug 06 2019 - 22:39:39 +0000) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Olimex A64 Teres-I
DRAM: 2 GiB
MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial
Out: vidconsole
Err: vidconsole
Net: No ethernet found.
starting USB...
Bus usb@1c1b000: USB EHCI 1.00
scanning bus usb@1c1b000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
19606 bytes read in 4 ms (4.7 MiB/s)
Found EFI removable media binary efi/boot/bootaa64.efi
MMC: no card present
Scanning disk m...@1c0f000.blk...
Disk m...@1c0f000.blk not ready
Card did not respond to voltage select!
Scanning disk m...@1c10000.blk...
Disk m...@1c10000.blk not ready
Scanning disk m...@1c11000.blk...
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
159484 bytes read in 10 ms (15.2 MiB/s)
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 0.17
boot>
booting sd0a:/bsd: 6060108+1228568+514296+816936
[422297+109+714912+416614]=0xac09f8
type 0x2 pa 0x40000000 va 0x40000000 pages 0x4000 attr 0x8
type 0x7 pa 0x44000000 va 0x44000000 pages 0x3ef8 attr 0x8
type 0x4 pa 0x47ef8000 va 0x47ef8000 pages 0x10 attr 0x8
type 0x7 pa 0x47f08000 va 0x47f08000 pages 0x705e9 attr 0x8
type 0x2 pa 0xb84f1000 va 0xb84f1000 pages 0xa0e attr 0x8
type 0x1 pa 0xb8eff000 va 0xb8eff000 pages 0x27 attr 0x8
type 0x0 pa 0xb8f26000 va 0xb8f26000 pages 0x7 attr 0x8
type 0x6 pa 0xb8f2d000 va 0x9b4d7f000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0xb8f2e000 va 0xb8f2e000 pages 0x3 attr 0x8
type 0x6 pa 0xb8f31000 va 0x9b4d83000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0xb8f32000 va 0xb8f32000 pages 0x1 attr 0x8
type 0x2 pa 0xb8f33000 va 0xb8f33000 pages 0x501d attr 0x8
type 0x5 pa 0xbdf50000 va 0x9b9da2000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0xbdf60000 va 0xbdf60000 pages 0xa0 attr 0x8
type 0x0 pa 0xbe000000 va 0xbe000000 pages 0x401 attr 0x8
type 0x2 pa 0xbe401000 va 0xbe401000 pages 0x1bff attr 0x8
[ using 1554904 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.5-current (GENERIC.MP) #158: Tue Aug 6 16:46:13 MDT 2019
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 2018381824 (1924MB)
avail mem = 1928839168 (1839MB)
mainbus0 at root: Olimex A64 Teres-I
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x20190700
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
"osc24M_clk" at mainbus0 not configured
"osc32k_clk" at mainbus0 not configured
"internal-osc-clk" at mainbus0 not configured
"sound_spdif" at mainbus0 not configured
"spdif-out" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4 ipi: 0, 1: "interrupt-controller"
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sxirsb0 at simplebus0
axppmic0 at sxirsb0 addr 0x3a3: AXP803
"de2" at simplebus0 not configured
"syscon" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
sximmc1 at simplebus0
sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
sximmc2 at simplebus0
sdmmc2 at sximmc2: 8-bit, sd high-speed, mmc high-speed, dma
"eeprom" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
ohci0 at simplebus0
#############
It is at this point ^^^ that the boot process stops proceeding indefinitely.
#############
U-Boot SPL 2019.07 (Aug 06 2019 - 22:39:39 +0000)
DRAM: 2048 MiB
Trying to boot from MMC2
NOTICE: BL31: v2.1(release):v2.1
NOTICE: BL31: Built : 22:20:23, Aug 6 2019
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x408a4a0, model: Olimex A64 Teres-I
NOTICE: BL31: PMIC: Detected AXP803 on RSB.
U-Boot 2019.07 (Aug 06 2019 - 22:39:39 +0000) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Olimex A64 Teres-I
DRAM: 2 GiB
MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial
Out: vidconsole
Err: vidconsole
Net: No ethernet found.
starting USB...
Bus usb@1c1b000: USB EHCI 1.00
scanning bus usb@1c1b000 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
19606 bytes read in 3 ms (6.2 MiB/s)
Found EFI removable media binary efi/boot/bootaa64.efi
MMC: no card present
Scanning disk m...@1c0f000.blk...
Disk m...@1c0f000.blk not ready
Card did not respond to voltage select!
Scanning disk m...@1c10000.blk...
Disk m...@1c10000.blk not ready
Scanning disk m...@1c11000.blk...
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
159484 bytes read in 10 ms (15.2 MiB/s)
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 0.17
boot> boot sd0a:/bsd -c
booting sd0a:/bsd: 6060108+1228568+514296+816936
[422297+109+714912+416614]=0xac09f8
type 0x2 pa 0x40000000 va 0x40000000 pages 0x4000 attr 0x8
type 0x7 pa 0x44000000 va 0x44000000 pages 0x3ef8 attr 0x8
type 0x4 pa 0x47ef8000 va 0x47ef8000 pages 0x10 attr 0x8
type 0x7 pa 0x47f08000 va 0x47f08000 pages 0x705e9 attr 0x8
type 0x2 pa 0xb84f1000 va 0xb84f1000 pages 0xa0e attr 0x8
type 0x1 pa 0xb8eff000 va 0xb8eff000 pages 0x27 attr 0x8
type 0x0 pa 0xb8f26000 va 0xb8f26000 pages 0x7 attr 0x8
type 0x6 pa 0xb8f2d000 va 0x9b4d7f000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0xb8f2e000 va 0xb8f2e000 pages 0x3 attr 0x8
type 0x6 pa 0xb8f31000 va 0x9b4d83000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0xb8f32000 va 0xb8f32000 pages 0x1 attr 0x8
type 0x2 pa 0xb8f33000 va 0xb8f33000 pages 0x501d attr 0x8
type 0x5 pa 0xbdf50000 va 0x9b9da2000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0xbdf60000 va 0xbdf60000 pages 0xa0 attr 0x8
type 0x0 pa 0xbe000000 va 0xbe000000 pages 0x401 attr 0x8
type 0x2 pa 0xbe401000 va 0xbe401000 pages 0x1bff attr 0x8
[ using 1554904 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.5-current (GENERIC.MP) #158: Tue Aug 6 16:46:13 MDT 2019
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 2018381824 (1924MB)
avail mem = 1928839168 (1839MB)
User Kernel Config
UKC> disable ohci
133 ohci* disabled
169 ohci* disabled
UKC> quit
Continuing...
mainbus0 at root: Olimex A64 Teres-I
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x20190700
apm0 at mainbus0
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
"osc24M_clk" at mainbus0 not configured
"osc32k_clk" at mainbus0 not configured
"internal-osc-clk" at mainbus0 not configured
"sound_spdif" at mainbus0 not configured
"spdif-out" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4 ipi: 0, 1: "interrupt-controller"
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sxirsb0 at simplebus0
axppmic0 at sxirsb0 addr 0x3a3: AXP803
"de2" at simplebus0 not configured
"syscon" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
sximmc1 at simplebus0
sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
sximmc2 at simplebus0
sdmmc2 at sximmc2: 8-bit, sd high-speed, mmc high-speed, dma
"eeprom" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
"usb" at simplebus0 not configured
com0 at simplebus0: ns16550, no working fifo
com0: console
sxitwi0 at simplebus0
iic0 at sxitwi0
"hdmi-phy" at simplebus0 not configured
sxirtc0 at simplebus0
"interrupt-controller" at simplebus0 not configured
"watchdog" at simplebus0 not configured
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio1: 32 pins
"gpio-keys" at mainbus0 not configured
"leds" at mainbus0 not configured
"usb1-vbus" at mainbus0 not configured
"wifi_pwrseq" at mainbus0 not configured
simplefb0 at mainbus0: 1366x768, 32bpp
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
manufacturer 0x024c, product 0xb723 at sdmmc1 function 1 not configured
scsibus0 at sdmmc2: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Micron, R1J56L, 0000> SCSI2 0/direct removable
sd0: 14080MB, 512 bytes/sector, 28835840 sectors
uhub1 at uhub0 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/85.36 addr 2
urtwn0 at uhub1 port 2 configuration 1 interface 0 "Realtek 802.11n NIC" rev
2.00/0.00 addr 3
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address 84:16:f9:1d:70:5c
uvideo0 at uhub1 port 3 configuration 1 interface 0 "Generic USB2.0 PC CAMERA"
rev 2.00/1.00 addr 4
video0 at uvideo0
umodem0 at uhub1 port 4 configuration 1 interface 2 "Olimex Ltd. TERES
Keyboard+Touchpad (drv)" rev 1.10/0.01 addr 5
umodem0: data interface 3, has no CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (7f4f193dd87e3ae5.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (7f4f193dd87e3ae5.a): file system is clean; not checking
/dev/sd0l (7f4f193dd87e3ae5.l): file system is clean; not checking
/dev/sd0d (7f4f193dd87e3ae5.d): file system is clean; not checking
/dev/sd0f (7f4f193dd87e3ae5.f): file system is clean; not checking
/dev/sd0g (7f4f193dd87e3ae5.g): file system is clean; not checking
/dev/sd0h (7f4f193dd87e3ae5.h): file system is clean; not checking
/dev/sd0k (7f4f193dd87e3ae5.k): file system is clean; not checking
/dev/sd0j (7f4f193dd87e3ae5.j): file system is clean; not checking
/dev/sd0e (7f4f193dd87e3ae5.e): file system is clean; not checking
pf enabled
ddb.console: 0 -> 1
starting network
urtwn0: no link... got link
urtwn0: no lease..... got lease
urtwn0: 192.168.1.28 lease accepted from 192.168.1.1 (c8:d7:19:d9:eb:54)
reordering libraries: done.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Sun Aug 11 16:25:28 PDT 2019
OpenBSD/arm64 (hedges.my.domain) (console)
login:
--
ioh
