On Wed, Feb 06, 2019 at 12:49:37PM +0100, Reyk Floeter wrote: > Hi, > > Picking up this old thread: I've installed the dtb on my Rock64 > running the snapshot from Feb 5. It enables the additinal USB, the > rkclock, "apm", and it seems that RSA is twice as fast, but it somehow > breaks networking via dwge0. > > I noticed that with the dtb, ssh -v to the rock64 shows progress but > runs *very* slow and even after login I don't manage to use the > session. I can ping but the delay to the next hop drops down from > 0.xms to about 2ms. tcpbench and other real networking are totally > unusable. > > I tried with and without apm -H (408MHz vs. 1296MHz) without seeing > any improvement. Disabling apm0 or rkclock0 doesn't helper either. > > Any idea how to debug this? > > Reyk
Perhaps unrelated, but I found similar networking problems with my Banana Pro board. The onboard dwge0 interface dropped packets like crazy, making that interface totally unusable. I didn't get far in troubleshooting before I gave up and used a USB axe-based ethernet dongle. -- Jon Tabor | tab...@obsolete.site | http://obsolete.site "Once in a while you get shown the light In the strangest of places if you look at it right."
