Toggling the bootable flag on the MSDOS partition on the internal flash, so that only the MSDOS partition on the Micro SD card had the bootable flag set, DID NOT WORK.
Nothing seems to work. What is the secret sauce to get it to boot from the micro SD card? -------------------------------------------- On Sat, 5/13/17, Kenneth Hendrickson <dsp_s...@yahoo.com> wrote: Subject: Re: BeagleBoard Black Won't Boot into OpenBSD Installer To: arm@openbsd.org Date: Saturday, May 13, 2017, 12:58 AM I followed this: http://www.TedUnangst.com/flak/post/OpenBSD-on-BeagleBone-Black but it always booted into Linux. What is the secret sauce to get it to boot from the micro SD card? -------------------------------------------- On Sat, 5/13/17, Kenneth Hendrickson <dsp_s...@yahoo.com> wrote: Subject: BeagleBoard Black Won't Boot into OpenBSD Installer To: arm@openbsd.org Date: Saturday, May 13, 2017, 12:04 AM I can't get Beagleboard Black to boot into the OpenBSD installer. What am I doing wrong? What I did: * Copied miniroot-am335x-61.fs to my Micro SD card with dd * Placed Micro SD card into Beagleboard Black * Held button hear SD card while applying power, and/or rebooting It always reboots into Linux. Evidence: root@beaglebone:~# reboot Broadcast message from root@beaglebone (ttyO0) (Thu Nov 12 19:07:03 2015): The system is going down for reboot NOW! root@beaglebone:~# Sending SIGTERM to remaining processes... Sending SIGKILL to remaining processes... Unmounting file systems. Unmounted /sys/fs/fuse/connections. Unmounted /sys/kernel/security. Unmounted /sys/kernel/debug. Unmounted /dev/mqueue. Disabling swaps. Detaching loop devices. Detaching DM devices. [ 324.358219] (NULL device *): gadget not registered. [ 324.371348] Restarting system. U-Boot SPL 2015.10-00001-g143c9ee (Nov 06 2015 - 15:27:19) bad magic U-Boot 2015.10-00001-g143c9ee (Nov 06 2015 - 15:27:19 -0600), Build: jenkins-gi4 Watchdog enabled I2C: ready DRAM: 512 MiB Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Checking for: /uEnv.txt ... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Checking for: /boot.scr ... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Checking for: /boot/boot.scr ... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Checking for: /boot/uEnv.txt ... Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** ** Invalid partition 2 ** ** Invalid partition 3 ** ** Invalid partition 4 ** ** Invalid partition 5 ** ** Invalid partition 6 ** ** Invalid partition 7 ** gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 1800 bytes read in 15 ms (117.2 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-3.8.13-bone79 ... 5644336 bytes read in 328 ms (16.4 MiB/s) loading /boot/dtbs/3.8.13-bone79/am335x-boneblack.dtb ... 26118 bytes read in 21 ms (1.2 MiB/s) loading /boot/initrd.img-3.8.13-bone79 ... 2862929 bytes read in 175 ms (15.6 MiB/s) debug: [console=ttyO0,115200n8 root=UUID=ea3d5ca5-9e98-4dba-805d-387512f01c15 r. debug: [bootz 0x82000000 0x88080000:2baf51 0x88000000] ... Kernel image @ 0x82000000 [ 0x000000 - 0x562030 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fd45000, end 8fffff51 ... OK Loading Device Tree to 8fd3b000, end 8fd44605 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.372520] omap2_mbox_probe: platform not supported [ 0.528233] tps65217-bl tps65217-bl: no platform data provided [ 0.592209] bone-capemgr bone_capemgr.9: slot #0: No cape found [ 0.629317] bone-capemgr bone_capemgr.9: slot #1: No cape found [ 0.666425] bone-capemgr bone_capemgr.9: slot #2: No cape found [ 0.703534] bone-capemgr bone_capemgr.9: slot #3: No cape found [ 0.719284] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P) [ 0.728854] bone-capemgr bone_capemgr.9: slot #6: Failed verification [ 0.735582] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BO) [ 0.752256] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed [ 0.815133] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested b8 [ 0.826793] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 [ 0.834063] pinctrl-single 44e10800.pinmux: could not request pin 21 on devie Loading, please wait... systemd-fsck[204]: rootfs: clean, 97232/227584 files, 519551/909056 blocks Debian GNU/Linux 7 beaglebone ttyO0 BeagleBoard.org Debian Image 2015-11-12 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] The IP Address for usb0 is: 192.168.7.2 beaglebone login: [ 26.205892] libphy: PHY 4a101000.mdio:01 not found [ 26.210972] net eth0: phy 4a101000.mdio:01 not found on slave 1 Debian GNU/Linux 7 beaglebone ttyO0 BeagleBoard.org Debian Image 2015-11-12 Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] The IP Address for usb0 is: 192.168.7.2 beaglebone login:
