The i.MX version is definitely the wrong one. You gotta try the SUNXI version.
\Patrick > Am 23.12.2014 um 21:43 schrieb Brian Conway <bcon...@rcesoftware.com>: > > Obviously not supported hardware, but wanted to throw this out in case > it's of use to anyone. I picked up the mid-level CuBox-i2eX > (dual-core, serial over USB, > http://www.solid-run.com/products/cubox-i-mini-computer/cubox-i-specifications/) > model and attempted to load the 12/14/2014 IMX snapshot (via tftp > using SolidRun's Ignition image as the U-Boot source). Logs are below, > let me know if there's any assistance I can in the future. Thanks. > > U-Boot SPL 2013.10-rc4 (Oct 27 2014 - 18:17:31) > Boot Device: SD1 > spl: error reading image u-boot.img, err - -1 > Load image from RAW... > > > U-Boot 2013.10-rc4 (Oct 27 2014 - 18:17:31) > > CPU: Freescale i.MX6Q rev1.5 at 792 MHz > Reset cause: WDOG > Board: MX6-CuBox-i > DRAM: 1 GiB > MMC: FSL_SDHC: 0 > *** Warning - bad CRC, using default environment > > In: serial > Out: vga > Err: vga > Net: FEC [PRIME] > (Re)start USB... > USB0: USB EHCI 1.00 > scanning bus 0 for devices... 1 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > scanning usb for ethernet devices... 0 Ethernet Device(s) found > Hit any key to stop autoboot: 0 > CuBox-i U-Boot > dhcp > BOOTP broadcast 1 > DHCP client bound to address 10.X.Y.113 > Using FEC device > TFTP from server 10.X.Y.1; our IP address is 10.X.Y.113 > Filename 'pxelinux.0'. > Load address: 0x10800000 > Loading: #### > 1.2 MiB/s > done > Bytes transferred = 46909 (b73d hex) > CuBox-i U-Boot > tftpboot ${loadaddr} openbsd/bsd.rd.IMX.umg > Using FEC device > TFTP from server 10.X.Y.1; our IP address is 10.X.Y.113 > Filename 'openbsd/bsd.rd.IMX.umg'. > Load address: 0x10800000 > Loading: ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ################################################################# > ###################################################### > 1.4 MiB/s > done > Bytes transferred = 7461152 (71d920 hex) > CuBox-i U-Boot > bootm > ## Booting kernel from Legacy Image at 10800000 ... > Image Name: boot > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 7461088 Bytes = 7.1 MiB > Load Address: 10800000 > Entry Point: 10800000 > Verifying Checksum ... OK > XIP Kernel Image ... OK > > Starting kernel ... > > undefined instruction > pc : [<10800008>] lr : [<4ff723b9>] > sp : 4f770d70 ip : 0000001e fp : 00000000 > r10: 00000000 r9 : 4f770f38 r8 : 4ff724e9 > r7 : 00000000 r6 : 10800000 r5 : 4ffa1c6c r4 : 00000000 > r3 : 4f770fe0 r2 : 10000100 r1 : 000012d5 r0 : 4f770fe0 > Flags: nZCv IRQs off FIQs off Mode SVC_32 > Resetting CPU ... > > resetting ... > > Brian Conway >
