Just installed Patrick's fresh snapshot.
OpenBSD 5.4-current (GENERIC-OMAP) #11: Tue Oct 8 08:49:25 CEST 2013
r...@imx.fritz.box:/usr/src/sys/arch/armv7/compile/GENERIC-OMAP
real mem = 536870912 (512MB)
avail mem = 519208960 (495MB)
mainbus0 at root
cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
omap0 at mainbus0: BeagleBone
prcm0 at omap0 rev 0.2
sitaracm0 at omap0: control module, rev 1.0
intc0 at omap0 rev 5.0
omap0: device edma unit 0 not configured
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
omdog0 at omap0 rev 0.1
ommmc0 at omap0
sdmmc0 at ommmc0
ommmc1 at omap0
sdmmc1 at ommmc1
com0 at omap0: ti16750, 64 byte fifo
com0: console
cpsw0 at omap0: version 1.12 (0), address 90:59:af:5f:1e:3d
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0001f0, model 0x000f
/dev/ksyms: Symbol table not valid.
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 16000MB, 512 bytes/sector, 32768000 sectors
scsibus1 at sdmmc1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 1832MB, 512 bytes/sector, 3751936 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd0
root on sd0a (2fd113e40920709f.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
Mostly seems to work, but this is how my boot sequence ends:
DHCPREQUEST on cpsw0 to 255.255.255.255 port 67
DHCPACK from 192.168.111.1 (00:0d:b9:12:9f:2d)
bound to 192.168.111.11 -- renewal in 21600 seconds.
dmtimer_intr: negative duration!
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Segmentation fault
Also, tmux keeps segfaulting on me.
Is anyone else seeing this?
Jan
