tralalaaa im so happy!
during weekend i almost gave up, did already order pandaboard and
beaglebone black to just get the project forward i bought the cubie
for..
oh well i can find a use for them too.
now is time to allow ehci1 to attach again and see if i can make this
crash with usb-wifi.
so many things to try, hard to decide where to begin, will have fun :)
i hope i can get myself to clean things up a bit, com-related things are
really messy as is, i really mutilated com.c
- Artturi
OpenBSD/allwinner booting ...
arg0 0x0 arg1 0x1008 arg2 0x40000100
atag core flags 0 pagesize 0 rootdev 0
atag mem start 0x40000000 size 0x40000000
atag cmdline [sd0a:/bsd.umg]
bootfile: sd0a:/bsd.umg
bootargs:
memory size derived from u-boot
bootconf.mem[0].address = 40000000 pages 262144/0x40000000
Allocating page tables
freestart = 0x005d3000, free_pages = 268845 (0x00041a2d)
IRQ stack: p0x41fd1000 v0xc1fd1000
ABT stack: p0x41fd0000 v0xc1fd0000
UND stack: p0x41fcf000 v0xc1fcf000
SVC stack: p0x41fcd000 v0xc1fcd000
Creating L1 page table at 0x41ffc000
Mapping kernel
Constructing L2 page tables
undefined page pmap [ no symbol table formats found ]
board type: cubie
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.4-beta (GENERIC) #4: Wed Jul 17 01:40:50 EEST 2013
a...@tfort.local.lan:/usr/src/sys/arch/allwinner/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1045852160 (997MB)
mainbus0 at root
cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
aw0 at mainbus0: Cubieboard
awgpio0 at aw0
awtimer0 at aw0: tick rate 187 KHz hz 100 stat rate 187 KHz stathz 128
counter 24000 KHz
ehci0 at aw0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Allwinner EHCI root hub" rev 2.00/1.00 addr 1
com0 at aw0: ns16550a, 64 byte fifo
com0: console
/dev/ksyms: Symbol table not valid.
umass0 at uhub0 port 1 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Kingston, DataTraveler 2.0, 6.00> SCSI2
0/direct removable serial.093065337B416393837F
sd0: 489MB, 512 bytes/sector, 1001472 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: sd0
root on sd0a (8718554ec688995c.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
init: copying out path `/sbin/init' 11
init: trying to exec /sbin/init
swapctl: /dev/sd0b: Device not configured
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
setting tty flags
pf enabled
starting network
starting early daemons: syslogd pflogd.
starting RPC daemons:.
savecore: can't find device 0/0
checking quotas: done.
kvm_mkdb: can't open /dev/ksyms
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd sendmail sndiod.
starting local daemons: cron.
Tue Jul 16 16:35:42 MDT 2013
OpenBSD/allwinner (noname.my.domain) (console)
login: root
Password:
Last login: Tue Jul 16 16:35:41 on console
OpenBSD 5.4-beta (GENERIC) #4: Wed Jul 17 01:40:50 EEST 2013
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have mail.
# w00t!
ksh: w00t!: not found
#
