2013/6/26 Artturi Alm <artturi....@gmail.com>: > Yeah, now intc is attaching, and possibly even working :) > i think i'll find out soon after timer attaches so initclocks wouldnt panic.
they weren't... interesting stuff anyway, while very frustrating w/my (missing) knowledge, after banging my head into walls for a few days, i got it further... :) OpenBSD/allwinner booting ... arg0 0x0 arg1 0x1008 arg2 0x40000100 atag core flags 0 pagesize 0 rootdev 0 atag mem start 0x40000000 size 0x40000000 atag cmdline [sd0i:/bsd.umg] bootfile: sd0i:/bsd.umg bootargs: memory size derived from u-boot bootconf.mem[0].address = 40000000 pages 262144/0x40000000 Allocating page tables freestart = 0x005ca000, free_pages = 268854 (0x00041a36) IRQ stack: p0x41fd1000 v0xc1fd1000 ABT stack: p0x41fd0000 v0xc1fd0000 UND stack: p0x41fcf000 v0xc1fcf000 SVC stack: p0x41fcd000 v0xc1fcd000 Creating L1 page table at 0x41ffc000 Mapping kernel Constructing L2 page tables undefined page pmap [ no symbol table formats found ] board type: cubie Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.3-current (GENERIC) #10: Sun Jun 30 21:19:22 EEST 2013 a...@tfort.local.lan:/usr/src/sys/arch/allwinner/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1045884928 (997MB) mainbus0 at root cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core) cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache aw0 at mainbus0: Cubieboard awccm0 at aw0 awintc0 at aw0 awtimer0 at aw0: tick rate 24000 KHz irq:22 hz:100 awtimer_cpu_initclocks: establish intr irq 22 awintc_intr_establish: irq 22 level 10 [tick] irq 22 to block at 10 10 reg 168 bit 22 /dev/ksyms: Symbol table not valid. vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root scsibus1 at softraid0: 256 targets boot device: lookup 'sd0i:/bsd.umg' failed. root device: asd use one of: exit root device: