From: Samson Tam <samson....@amd.com>
[Why]
SPL code forces taps to 1 when ratio is 1:1 and sharpness is off
But for chroma 1:1, need taps > 1 to handle cositing
[How]
Do not force chroma taps to 1 when ratio is 1:1 for YUV420
Remove 420_CHROMA_BYPASS mode for scaler
Reviewed-by: Navid Assadian <navid.assad...@amd.com>
Signed-off-by: Samson Tam <samson....@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahf...@amd.com>
---
drivers/gpu/drm/amd/display/dc/spl/dc_spl.c | 34 ++++++++++++---------
1 file changed, 20 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/spl/dc_spl.c
b/drivers/gpu/drm/amd/display/dc/spl/dc_spl.c
index da477406a4b7..73a65913cb12 100644
--- a/drivers/gpu/drm/amd/display/dc/spl/dc_spl.c
+++ b/drivers/gpu/drm/amd/display/dc/spl/dc_spl.c
@@ -739,14 +739,13 @@ static enum scl_mode spl_get_dscl_mode(const struct
spl_in *spl_in,
return SCL_MODE_SCALING_444_RGB_ENABLE;
}
- /* Bypass YUV if at 1:1 with no ISHARP or if doing 2:1 YUV
- * downscale without EASF
+ /*
+ * Bypass YUV if Y is 1:1 with no ISHARP
+ * Do not bypass UV at 1:1 for cositing to be applied
*/
- if ((!enable_isharp) && (!enable_easf)) {
+ if (!enable_isharp) {
if (data->ratios.horz.value == one && data->ratios.vert.value
== one)
return SCL_MODE_SCALING_420_LUMA_BYPASS;
- if (data->ratios.horz_c.value == one &&
data->ratios.vert_c.value == one)
- return SCL_MODE_SCALING_420_CHROMA_BYPASS;
}
return SCL_MODE_SCALING_420_YCBCR_ENABLE;
@@ -933,6 +932,7 @@ static bool spl_get_optimal_number_of_taps(
int min_taps_y, min_taps_c;
enum lb_memory_config lb_config;
bool skip_easf = false;
+ bool is_ycbcr = spl_dscl_is_video_format(spl_in->basic_in.format);
if (spl_scratch->scl_data.viewport.width >
spl_scratch->scl_data.h_active &&
max_downscale_src_width != 0 &&
@@ -1074,10 +1074,9 @@ static bool spl_get_optimal_number_of_taps(
/* Sharpener requires scaler to be enabled, including for 1:1
* Check if ISHARP can be enabled
- * If ISHARP is not enabled, for 1:1, set taps to 1 and disable
- * EASF
- * For case of 2:1 YUV where chroma is 1:1, set taps to 1 if
- * EASF is not enabled
+ * If ISHARP is not enabled, set taps to 1 if ratio is 1:1
+ * except for chroma taps. Keep previous taps so it can
+ * handle cositing
*/
*enable_isharp = spl_get_isharp_en(spl_in, spl_scratch);
@@ -1087,20 +1086,28 @@ static bool spl_get_optimal_number_of_taps(
spl_scratch->scl_data.taps.h_taps = 1;
spl_scratch->scl_data.taps.v_taps = 1;
- if (IDENTITY_RATIO(spl_scratch->scl_data.ratios.horz_c))
+ if (IDENTITY_RATIO(spl_scratch->scl_data.ratios.horz_c)
&& !is_ycbcr)
spl_scratch->scl_data.taps.h_taps_c = 1;
- if (IDENTITY_RATIO(spl_scratch->scl_data.ratios.vert_c))
+ if (IDENTITY_RATIO(spl_scratch->scl_data.ratios.vert_c)
&& !is_ycbcr)
spl_scratch->scl_data.taps.v_taps_c = 1;
*enable_easf_v = false;
*enable_easf_h = false;
} else {
if ((!*enable_easf_h) &&
+
(IDENTITY_RATIO(spl_scratch->scl_data.ratios.horz)))
+ spl_scratch->scl_data.taps.h_taps = 1;
+
+ if ((!*enable_easf_v) &&
+
(IDENTITY_RATIO(spl_scratch->scl_data.ratios.vert)))
+ spl_scratch->scl_data.taps.v_taps = 1;
+
+ if ((!*enable_easf_h) && !is_ycbcr &&
(IDENTITY_RATIO(spl_scratch->scl_data.ratios.horz_c)))
spl_scratch->scl_data.taps.h_taps_c = 1;
- if ((!*enable_easf_v) &&
+ if ((!*enable_easf_v) && !is_ycbcr &&
(IDENTITY_RATIO(spl_scratch->scl_data.ratios.vert_c)))
spl_scratch->scl_data.taps.v_taps_c = 1;
}
@@ -1111,8 +1118,7 @@ static bool spl_get_optimal_number_of_taps(
static void spl_set_black_color_data(enum spl_pixel_format format,
struct scl_black_color *scl_black_color)
{
- bool ycbcr = format >= SPL_PIXEL_FORMAT_VIDEO_BEGIN
- && format <= SPL_PIXEL_FORMAT_VIDEO_END;
+ bool ycbcr = spl_dscl_is_video_format(format);
if (ycbcr) {
scl_black_color->offset_rgb_y = BLACK_OFFSET_RGB_Y;
scl_black_color->offset_rgb_cbcr = BLACK_OFFSET_CBCR;
--
2.46.1
