From: Samson Tam <samson....@amd.com>
[Why]
Add public API to obtain number of taps in SPL.
[How]
Isolate function to calculate recout, ratios and viewport before
calculating taps. Call function in both public taps API call and private
scaling call.
Reviewed-by: Jun Lei <jun....@amd.com>
Signed-off-by: Samson Tam <samson....@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahf...@amd.com>
---
drivers/gpu/drm/amd/display/dc/spl/dc_spl.c | 63 +++++++++++++++------
drivers/gpu/drm/amd/display/dc/spl/dc_spl.h | 2 +
2 files changed, 48 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/spl/dc_spl.c
b/drivers/gpu/drm/amd/display/dc/spl/dc_spl.c
index 614276200aa0..da477406a4b7 100644
--- a/drivers/gpu/drm/amd/display/dc/spl/dc_spl.c
+++ b/drivers/gpu/drm/amd/display/dc/spl/dc_spl.c
@@ -99,7 +99,7 @@ static struct spl_rect calculate_plane_rec_in_timing_active(
*
* recout_x = 128 + round(plane_x * 2304 / 1920)
* recout_w = 128 + round((plane_x + plane_w) * 2304 / 1920) - recout_x
- * recout_y = 0 + round(plane_y * 1440 / 1280)
+ * recout_y = 0 + round(plane_y * 1440 / 1200)
* recout_h = 0 + round((plane_y + plane_h) * 1440 / 1200) - recout_y
*
* NOTE: fixed point division is not error free. To reduce errors
@@ -1746,6 +1746,32 @@ static void spl_set_isharp_data(struct dscl_prog_data
*dscl_prog_data,
spl_set_blur_scale_data(dscl_prog_data, data);
}
+/* Calculate recout, scaling ratio, and viewport, then get optimal number of
taps */
+static bool spl_calculate_number_of_taps(struct spl_in *spl_in, struct
spl_scratch *spl_scratch, struct spl_out *spl_out,
+ bool *enable_easf_v, bool *enable_easf_h, bool *enable_isharp)
+{
+ bool res = false;
+
+ memset(spl_scratch, 0, sizeof(struct spl_scratch));
+ spl_scratch->scl_data.h_active = spl_in->h_active;
+ spl_scratch->scl_data.v_active = spl_in->v_active;
+
+ // All SPL calls
+ /* recout calculation */
+ /* depends on h_active */
+ spl_calculate_recout(spl_in, spl_scratch, spl_out);
+ /* depends on pixel format */
+ spl_calculate_scaling_ratios(spl_in, spl_scratch, spl_out);
+ /* depends on scaling ratios and recout, does not calculate offset yet
*/
+ spl_calculate_viewport_size(spl_in, spl_scratch);
+
+ res = spl_get_optimal_number_of_taps(
+ spl_in->basic_out.max_downscale_src_width, spl_in,
+ spl_scratch, &spl_in->scaling_quality, enable_easf_v,
+ enable_easf_h, enable_isharp);
+ return res;
+}
+
/* Calculate scaler parameters */
bool spl_calculate_scaler_params(struct spl_in *spl_in, struct spl_out
*spl_out)
{
@@ -1760,23 +1786,9 @@ bool spl_calculate_scaler_params(struct spl_in *spl_in,
struct spl_out *spl_out)
bool enable_isharp = false;
const struct spl_scaler_data *data = &spl_scratch.scl_data;
- memset(&spl_scratch, 0, sizeof(struct spl_scratch));
- spl_scratch.scl_data.h_active = spl_in->h_active;
- spl_scratch.scl_data.v_active = spl_in->v_active;
-
- // All SPL calls
- /* recout calculation */
- /* depends on h_active */
- spl_calculate_recout(spl_in, &spl_scratch, spl_out);
- /* depends on pixel format */
- spl_calculate_scaling_ratios(spl_in, &spl_scratch, spl_out);
- /* depends on scaling ratios and recout, does not calculate offset yet
*/
- spl_calculate_viewport_size(spl_in, &spl_scratch);
+ res = spl_calculate_number_of_taps(spl_in, &spl_scratch, spl_out,
+ &enable_easf_v, &enable_easf_h, &enable_isharp);
- res = spl_get_optimal_number_of_taps(
- spl_in->basic_out.max_downscale_src_width, spl_in,
- &spl_scratch, &spl_in->scaling_quality,
&enable_easf_v,
- &enable_easf_h, &enable_isharp);
/*
* Depends on recout, scaling ratios, h_active and taps
* May need to re-check lb size after this in some obscure scenario
@@ -1824,3 +1836,20 @@ bool spl_calculate_scaler_params(struct spl_in *spl_in,
struct spl_out *spl_out)
return res;
}
+
+/* External interface to get number of taps only */
+bool spl_get_number_of_taps(struct spl_in *spl_in, struct spl_out *spl_out)
+{
+ bool res = false;
+ bool enable_easf_v = false;
+ bool enable_easf_h = false;
+ bool enable_isharp = false;
+ struct spl_scratch spl_scratch;
+ struct dscl_prog_data *dscl_prog_data = spl_out->dscl_prog_data;
+ const struct spl_scaler_data *data = &spl_scratch.scl_data;
+
+ res = spl_calculate_number_of_taps(spl_in, &spl_scratch, spl_out,
+ &enable_easf_v, &enable_easf_h, &enable_isharp);
+ spl_set_taps_data(dscl_prog_data, data);
+ return res;
+}
diff --git a/drivers/gpu/drm/amd/display/dc/spl/dc_spl.h
b/drivers/gpu/drm/amd/display/dc/spl/dc_spl.h
index 205e59a2a8ee..02a2d6725ed5 100644
--- a/drivers/gpu/drm/amd/display/dc/spl/dc_spl.h
+++ b/drivers/gpu/drm/amd/display/dc/spl/dc_spl.h
@@ -13,4 +13,6 @@
bool spl_calculate_scaler_params(struct spl_in *spl_in, struct spl_out
*spl_out);
+bool spl_get_number_of_taps(struct spl_in *spl_in, struct spl_out *spl_out);
+
#endif /* __DC_SPL_H__ */
--
2.46.1
