Do you have more than one soundcard? have you try -c 1, -c 2 etc ...?

also I've read we must have the IGAin control all the way up to 100 ... you
can change this with aumix.

But we still need to control the AC97 level ... hope someone is able to see
this and give us a hand.

On 25/02/2008, Phil Rhoades <[EMAIL PROTECTED]> wrote:
>
> Daniel,
>
> I also do not see this control with alsamixer and the only thing I see
> on my similar (non-working) system with "amixer -c 0" is:
>
> Simple mixer control 'IEC958 Playback AC97-SPSA',0
>   Capabilities: volume volume-joined
>   Playback channels: Mono
>   Capture channels: Mono
>   Limits: 0 - 3
>   Mono: 3 [100%]
>
>
> Phil.
>
>
>
> On Mon, 2008-02-25 at 15:52 +0000, Daniel Sanabria wrote:
> > any ideas? ... anyone?
> >
> > On 17/02/2008, Daniel Sanabria <[EMAIL PROTECTED]> wrote:
> >         now from http://alsa.opensrc.org/index.php/Record_from_mic I
> >         read the following:
> >
> >         Comment from reader: For me, the instructions above did not
> >         still cut it. I had to turn a control "AC97" to 100% (in
> >         addition to Mic and Capture to 100%).
> >
> >         I'm I supposed to see the AC97 control? where can I find it?
> >
> >
> >         On 17/02/2008, Daniel Sanabria <[EMAIL PROTECTED]> wrote:
> >                 Yes this is a PC mic (plantronics) and you're right it
> >                 doesn't have any source of power, it takes it from the
> >                 PC. However setting V_REFOUT to 3,7 or 2.25 doesn't
> >                 seem to make a difference.
> >
> >                 On 16/02/2008, James Shatto <[EMAIL PROTECTED]>
> >                 wrote:
> >                         > Simple mixer control 'V_REFOUT',0
> >                         >   Capabilities: enum
> >                         >   Items: 'High-Z' '3.7 V' '2.25 V' '0 V'
> >                         >   Item0: '0 V'
> >
> >                         What type of mic are we talking?  Electret
> >                         type mics(the kind that most PC style mics
> >                         seem to be/use) need a voltage(called a bias
> >                         voltage, or plug-in power for voice
> >                         recorders).  Without the voltage you need a
> >                         battery box.  Set it to 3.7V, if you
> >                         can.  2.25 V should also work.  0V and High-Z
> >                         would be my last choices.
> >
> >                         HTH
> >
> >
> -------------------------------------------------------------------------
> >                         This SF.net email is sponsored by: Microsoft
> >                         Defy all challenges. Microsoft(R) Visual
> >                         Studio 2008.
> >
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> >                         _______________________________________________
> >                         Alsa-user mailing list
> >                         Alsa-user@lists.sourceforge.net
> >
> https://lists.sourceforge.net/lists/listinfo/alsa-user
> >
> >
> >
> >
> >
> -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________ Alsa-user mailing list
> Alsa-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>
> --
>
> Philip Rhoades
>
> Pricom Pty Limited  (ACN 003 252 275  ABN 91 003 252 275)
> GPO Box 3411
> Sydney NSW      2001
> Australia
> Fax:     +61:(0)2-8221-9599
> E-mail:  [EMAIL PROTECTED]
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to