any ideas? ... anyone?

On 17/02/2008, Daniel Sanabria <[EMAIL PROTECTED]> wrote:
>
> now from http://alsa.opensrc.org/index.php/Record_from_mic I read the
> following:
>
> Comment from reader: *For me, the instructions above did not still cut it.
> I had to turn a control "AC97" to 100% (in addition to Mic and Capture to
> 100%).
>
> *I'm I supposed to see the AC97 control? where can I find it?*
> *
> On 17/02/2008, Daniel Sanabria <[EMAIL PROTECTED]> wrote:
> >
> > Yes this is a PC mic (plantronics) and you're right it doesn't have any
> > source of power, it takes it from the PC. However setting V_REFOUT to 3,7 or
> > 2.25 doesn't seem to make a difference.
> >
> > On 16/02/2008, James Shatto <[EMAIL PROTECTED]> wrote:
> > >
> > > > Simple mixer control 'V_REFOUT',0
> > > >   Capabilities: enum
> > > >   Items: 'High-Z' '3.7 V' '2.25 V' '0 V'
> > > >   Item0: '0 V'
> > >
> > > What type of mic are we talking?  Electret type mics(the kind that
> > > most PC style mics seem to be/use) need a voltage(called a bias voltage, 
> > > or
> > > plug-in power for voice recorders).  Without the voltage you need a 
> > > battery
> > > box.  Set it to 3.7V, if you can.  2.25 V should also work.  0V and
> > > High-Z would be my last choices.
> > >
> > > HTH
> > >
> > >
> > > -------------------------------------------------------------------------
> > > This SF.net email is sponsored by: Microsoft
> > > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > > _______________________________________________
> > > Alsa-user mailing list
> > > Alsa-user@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/alsa-user
> > >
> >
> >
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to