hi,
i need some help getting the tascam us428 running, hoping anybody has
already managed to do this.
i'm using alsa 1.0.4 on a gentoo system with kernel 2.6.5. i manually
installed alsa-driver 1.0.4 over the original modules from the kernel
tree.
the us428 seems to be recognized by the system, /proc/asound/cards says:
0 [USX2Y ]: USB US-X2Y - TASCAM US-X2Y
TASCAM US-X2Y (1604:8001 if 0 at 002/007)
the log entries look like this:
Apr 16 19:33:44 [kernel] usb 2-2: new full speed USB device using
address 6
Apr 16 19:33:44 [/etc/hotplug/usb/tascam_fw] load
/usr/share/alsa/firmware/usx2yloader/us428fw.ihx for 1604/8000/100 to
/proc/bus/usb/002/006
Apr 16 19:33:45 [kernel] usb 2-2: USB disconnect, address 6
Apr 16 19:33:47 [kernel] usb 2-2: new full speed USB device using
address 7
Apr 16 19:33:47 [/etc/hotplug/usb/tascam_fpga] calling
/usr/bin/usx2yloader for /proc/bus/usb/002/007
Apr 16 19:33:49 [/etc/hotplug/usb/tascam_fpga] starting
/usr/bin/us428control for /proc/bus/usb/002/007
Apr 16 19:33:49 [/etc/hotplug/usb/tascam_fpga] leaving
calling usx2yloader manually says:
usx2yloader: no US-X2Y-compatible cards found
same with us428control:
us428control: cannot open hwdep hw:1
us428control: cannot open hwdep hw:2
us428control: cannot open hwdep hw:3
us428control: cannot open hwdep hw:4
us428control: cannot open hwdep hw:5
us428control: cannot open hwdep hw:6
us428control: cannot open hwdep hw:7
us428control: no US-X2Y-compatible cards found
does anybody have any clues what's going wrong?
many thanks in advance: jan boehme.
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
