(a copy was sent to jackit-devel list too) Hi,
As a followup on this subject (see below) I've come near to a decision about the EDIROL UA-20, but still don't know if there's any specific issue with JACK for this USB adapter. Does anybody has any advice on this subject? Does the UA-20 work painlessly with JACK? Or is it in the same league regarding JACK compliance? IIRC this kind of question about USB devices and JACK are quite repetitive, but I'm just trying to make sure of the actual status, and avoid any purchase regretal :) Sorry for the bandwidth waste. Thanks anyway, -- rncbc aka Rui Nuno Capela [EMAIL PROTECTED] > Rui Nuno Capela wrote: >> While lurking on this alsa-user thread, I felt that I'm in great need to >> ask if any of you have any experience, good or bad, about one of the >> following USB audio/midi adapters: >> >> 1) EDIROL UA-20 >> 2) TASCAM US-122 >> 3) M-AUDIO QUATTRO >> >> Which one do you recommend, regarding ALSA _and_ JACK support? Please >> consider full Audio _and_ MIDI functionality as a requirement. > > The US-122 requires a firmware download utility and a special driver > which is still in beta. > > The Quattro doesn't always work with 4 channels, and doesn't work with > 2.6 kernels. > > The UA-20 works just fine (since ALSA 0.9.0rc8). > ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
