Günther Montag wrote: > From what ALSA version on is amidi there? I have 0.9.7.
0.9.7 is quite old. amidi was added in 1.0.0pre1. (You could try to compile and install the alsa-utils-1.0.1 package manually.) > With ALSA 0.9.7, card Via 82C686 there is no midi found. > Windoof finds midi device at io 0x200. > I tried to modprobe snd-mpu401 seperately with options port=0x200 irq=7 , it > shows in pmidi-l, [...] but cat /proc/interrupts shows no change and > cat/dev/midi gives nothing... The driver cannot detect if the given port address is correct (but there may be some error messages in the output of dmesg). Please check in the BIOS setup what the actual port address of the MIDI port is (0x200 is for accessing joystick through the gameport). It should be either 0x300 or 0x330. HTH Clemens ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
