On Mon, 2003-12-15 at 12:31, James McDonald wrote: > > > > First try to use dxs_support=1; if it does not work, try 4, or even 2 (in > > this case you will lose the (limited) hardware mixing support). If none > > of these values will work, install the xmms-crossfade plugin and configure > > it to resample everything to 48000 - it seems to perform resampling better > > than libalsa (at least there are no clicks). > > > sergey, > > Excuse my ignorance but is the dxs_support=1 an option you put into > modules.conf/modprobe.conf ?
modules.conf: ## ALSA portion alias snd-card-0 snd-via82xx options snd-via82xx dxs_support=4 alias snd-card-1 snd-hdsp alias snd-card-2 snd-usb-audio Note: I'm using a Via chip on this Asus A7V333-X, but not sure which one since lspci doesn't tell me: lspci: 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50) I'm getting low volume only out of this setup. With alsamixer turned up loud the whole signal chain seems distorted. If I lower master volume and PCM volume it gets better, but very quiet. I then have to amplify more coming back into my HDSP 9652. Important - Try all 5 versions of dxs_support one at a time: dxs_support=0,1,2,3 or 4 and see which one works best for you. Try both 44.1K and 48K material as it might make a difference, or it might not. Good luck, Mark ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
