Daniel Hawthorn wrote:
Do you have the USB host controller driver loaded, or is it compiled into the kernel?
Does the Quattro show up with lsusb?
By host controller driver, do you mean UCHI? I made sure to compile this into the kernel. When I unplug the quattro and then plug it back in, I get the following in /var/log/messages:
bartok:/home/dhawt# tail -f /var/log/messages
Oct 20 09:39:48 bartok kernel: hub 1-0:1.0: new USB device on port 1, assigned address 8
Oct 20 09:39:49 bartok kernel: drivers/usb/core/config.c: invalid alternate setting 4 for interface 1
Oct 20 09:39:49 bartok kernel: hub 1-0:1.0: new USB device on port 1, assigned address 9
Oct 20 09:39:49 bartok kernel: drivers/usb/core/config.c: invalid alternate setting 4 for interface 1
However, doing lsusb, I get the following:
bartok:/home/dhawt# lsusb Bus 001 Device 001: ID 0000:0000
Any additional advice you could give would be greatly appreciated.
-Daniel
-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
