> --------Message d'origine-------- > De: Takashi Iwai [mailto:[EMAIL PROTECTED] > Date: jeu. 25/09/2003 11:32 > À: HAMEL Matthias OCISI > Cc: [EMAIL PROTECTED] > Objet: Re: [Alsa-user] spdif on intel 8x0 (nforce2-MCT) > > > At Wed, 24 Sep 2003 22:43:17 +0200, > Matthias Hamel wrote: > > > > > > > > > alsa-init: soundcard set to spdif > > > > > ALSA lib pcm_hw.c:1055:(snd_pcm_hw_open) open /dev/snd/pcmC0D1p > > > > > > > > > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > > > > > > > here is the problem. > > > > perhaps it's a bug of config file. > > > > > > > > please try to change the line "device 1" to "device 2" > > > > of the definition of iec958 in /usr/share/alsa/cards/NFORCE.conf: > > > > > > > > Still not that ... > > > > Now, i get the same message with /dev/snd/pcmC0D2p > > > > > > please check whether you have /proc/asound/card0/pcm2p directory. > > > if you do, it's the problem of device file configuration. > > > if not, something goes wrong. > > > > > > > Well, I only have a /proc/asound/card0/pcm0p ( and pcm0c ) > > What's wrong ?
> hmm, a possible reason is that your ac97 codec seems having no spdif > bit. > > please check whether you have "IEC958" entries in alsamixer. > if you have, it must be a bug in intel8x0.c. > otherwise, it's the bug of ac97 detection routine, or simply you don't > have it. > > also, attach the contents of /proc/asound/card0/ac97#0 and ac97#0regs. > > > Takashi > > > I don't know if you got my previous message since I posted it with a non registered address, so I repost it ... I have no IEC958 in my alsamixer. And here is my /proc/asound/card0/ac97#0 [EMAIL PROTECTED] card0]# cat ac97#0 0-0/0: Realtek ALC650 rev 0 Capabilities : DAC resolution : 20-bit ADC resolution : 18-bit 3D enhancement : Realtek 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=1 AMAP LDAC SDAC CDAC DSA=0 SPDIF DRA VRA Extended status : SPCV LDAC SDAC CDAC SPDIF=3/4 VRA PCM front DAC : 48000Hz PCM Surr DAC : 48000Hz PCM LFE DAC : 48000Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Copyright Category=0x0 Generation=0 Rate=48kHz and my ac97#0regs : [EMAIL PROTECTED] card0]# cat ac97#0regs 0:00 = 5980 0:02 = 9f1f 0:04 = 0000 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 9f1f 0:16 = 9f1f 0:18 = 9f1f 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 07c7 0:2a = 05c1 0:2c = bb80 0:2e = bb80 0:30 = bb80 0:32 = bb80 0:34 = 0000 0:36 = 9f80 0:38 = 9f9f 0:3a = 2000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0808 0:66 = 0808 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0003 0:70 = 0211 0:72 = 6aa9 0:74 = 0063 0:76 = 0001 0:78 = 0102 0:7a = 57c0 0:7c = 414c 0:7e = 4720 Thanks for your help ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
