I'm trying to get my new RME DSP card (pci interface and multiface) to run
on a Debian/unstable system. As alsa-tools is not packaged (yet?) I compiled
from source, which looked to my (unexperienced) eye as being successful.
But I always have to call hdsploader twice:
hdsploader
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : RME Hammerfall DSP at 0xe2420000, irq 3
Upload firmware for card hw:0
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:677: wait for FIFO status <= 0 failed
after 30 iterations
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:3875: initializing firmware upload
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:549: loading firmware
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:677: wait for FIFO status <= 0 failed
after 5000 iterations
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:570: timeout at end of firmware loading
Hwdep ioctl error on card hw:0 : Input/output error.
hdsploader
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : RME Hammerfall DSP at 0xe2420000, irq 3
Upload firmware for card hw:0
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:3875: initializing firmware upload
Firmware uploaded for card hw:0
Is this normal?
BTW: I don't know if I have to be root to do that...
BTW2: As my audio system is still under construction, I cannot tell yet,
if the card is working or not.
Any help *very much* appreciated,
Robert Epprecht
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
