Greg,
How do I change the sampling rate? I tried the line
options snd-intel8x0 snd_id=CARD_0 snd_index=0 snd_ac97_clock=48000
but it didn't make any difference, it still says 44100. BTW, the ALSA
docs for the intel8x0 say
# parm: snd_ac97_clock int array (min = 1, max = 8),
description "AC'97 codec clock (0 = auto-detect)."
Playing with this option doesn't make any difference.
--
Pedro
On Wed, 2002-10-02 at 16:43, G. M. Bodnar wrote:
> Pedro I. sanchez is on permanent record as saying:
> :Hello,
> :
> :I'm running Debian 3.0 with kernel 2.4.18 and ALSA 0.9.0rc3 on an Intel
> :motherboard D815EFV. lspci reports the audio controller as 82820 820
> :(Camino 2) Chipset AC'97.
> :
> :The ALSA modules seem to load fine, and I can run alsamixer to unmute
> :the channels. The problem is that I get no sound at all. For example:
> :
> :# aplay /usr/share/sounds/info.wav
> :Playing WAVE '/usr/share/sounds/info.wav' : Signed 16 bit Little Endian,
> :Rate aplay -D rate_convert 44100 Hz, Mono
>
> This may be the wrong direction, but it's a possibility. I just got alsa
> running on my laptop (Dell Inspiron 2650, snd-intel8x0), but only with a
> sampling rate of 48000. (I need to track down somw docs on asoundrc...)
> Until I tried that, all attempts to run alsaplayer failed, saying it couldn't
> find a device with those capabilities.
>
> Give that rate a quick try. It might be the wrong direction, but it's a
> quick test.
>
> Greg
> --- -
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
