At Thu, 12 Sep 2002 00:04:08 -0400, Mike Baranczak wrote: > > > * From: Takashi Iwai > > * Subject: Re: [Alsa-user] ibmTP600e 2645-4au help > > * Date: Wed, 11 Sep 2002 01:17:26 -0700 > > > > At Tue, 10 Sep 2002 23:08:50 -0700 (PDT), > > j. roughan <[EMAIL PROTECTED]> wrote: > > > > help. Getting sound to work > > > > I am a 7.3 redcrap with a newly and functional 2-4-19 > > > kernel with sound modules compiled on an IBM stinkpad > > > 600e 2645-4au. IBM docs say I have a Cirrus Logic CS > > > 4239 and that I should use the CS4232 sound drivers > > > from OSS for sound. > > > > sound config utility says I have a CS4610 SoundFusion > > > Audio Accelerator. Does Sound Config lie? > > > > partially. TP600E actually has a pci device, but it's connected to a > > cs4236 chip inside. > > > > > Well, I can compile the alsa-driver & lib packages but > > > util starts choking & modprobe wont install the cs4232 > > > drivers init_module no such device error message & > > > failed. > > > > try alsaconf script > > ftp://ftp.suse.com/pub/projects/alsa/misc/alsaconf > > > > > > ciao, > > > > Takashi > > > I've got pretty much the same set-up as J. Roughan, (RedHat kernel > 2.4.9-34 on a TP600e, with ALSA 0.9.0rc3) and it won't start either. > I also tried using the cs46xx driver - no go. > I ran Takashi's script, and it correctly identified my machine, but > ended with the message "no legacy cards found".
the script tries only limited combination of parameters. and perhaps your configuration includes irregular values. please check the hardware parameters (port, irq, dma numbers) on bios. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
