>>>>> [EMAIL PROTECTED](Takashi Iwai) wrote:
>
> fm801 has an individual module for joystick, fm801-gp, because this
> chip has a separate pci configuration for the gameport.
> this module implements gameport, so you don't need analog module.
Where can I get fm801-gp module?
I can't find it in 2.4.19-pre10 kernel tree.
> on other drivers, you need to turn on the control switch.
> this switch turns on "the legacy joystick support". hence, in
> addition to that, ns558 module is required.
I have fm801 and es1370 cards on my pc, and a joystick attached to es1370 gameport.
Of cource, I activated "Joystick Enable" switch.
But, I can't load ns558 like this:
----------------------------------------------
bash-2.05# modprobe ns558
/lib/modules/2.4.19-pre10/kernel/drivers/char/joystick/ns558.o: init_module: No such
device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.19-pre10/kernel/drivers/char/joystick/ns558.o: insmod
/lib/modules/2.4.19-pre10/kernel/drivers/char/joystick/ns558.o failed
/lib/modules/2.4.19-pre10/kernel/drivers/char/joystick/ns558.o: insmod ns558 failed
----------------------------------------------
How can I load ns558 module?
> the joystick is supported on the following pci cards:
Thanks for the list.
But, how about cmipci?
The cmipci module also seems to have joystick switch.
Thanks,
Atsushi
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
