Hi all, especially Jaroslav! The subject very much says it all. I have tried everything I think. mplayer, xine, aplay, ac3dec mplayer and xine output is attached, mplayer brings up an error and xine just doesn't play sound.
aplay -D 'iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2' -f dat test.ac3 plays but I hear nothing. ac3dec test.ac3 plays and I have stereo PCM over SPDIF and normal analog output (depending on ADC/DAC and SB Live Analog/Digital Output Jack settings) ac3dec with -P/R/C plays but I hear nothing alsamixer reports: Card: Sound Blaster Live! Chip: SigmaTel STAC9708/11 Does anyone have an idea what to do? I heard that older cards don't work, but mine is pretty new. ( bought in September 01) Regards Markus Plail xine: audio_alsa_out: Audio Device name = iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2 audio_alsa_out: Number of channels = 2 audio_alsa_out:open:period_size=256 tmp=256 stream : PLAYBACK access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 16 buffer_size : 16384 period_size : 256 period_time : 5333 tick_time : 10000 tstamp_mode : NONE period_step : 1 sleep_min : 0 avail_min : 1 xfer_align : 256 start_threshold : 256 stop_threshold : 16384 silence_threshold: 0 silence_size : 0 boundary : 1073741824 start_mode: DATA xrun_mode: STOP tstamp_mode: NONE period_step: 1 sleep_min: 0 avail_min: 1 xfer_align: 256 silence_threshold: 0 silence_size: 0 boundary: 1073741824 audio_out: output sample rate 48000 mplayer: AO: [alsa9] 48000Hz Mono AC3 alsa-init: this driver is still at alpha-stage. if you want stable sound support use the OSS emulation instead. alsa-init: requested format: 48000 Hz, 1 channels, AC3 alsa-init: 1 soundcard found, using: hw:0,0 alsa-init: unable to set format: Invalid argument couldn't open/init audio device -> NOSOUND Audio: no sound!!! _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
