If that's the case, then maybe some uptilt on the SM, effectively moving the AP to the bottom of the pattern might work. Of course this relies on an antenna pattern with fairly sharp cutoff at the edges.
On Wed, Jul 3, 2024, 12:50 PM Peter Kranz via AF <af@af.afmug.com> wrote: > Easiest solution to this is to position the SM antenna in a location where > it cannot see the reflected signal from the corn field but still has clean > LOS to the main beam. We try to get clever about using features on the > rooftop, building, etc.. to block the multipath reflection. > > > > Peter Kranz > www.UnwiredLtd.com <http://www.unwiredltd.com/> > Desk: 510-868-1614 x100 > Mobile: 510-207-0000 > pkr...@unwiredltd.com > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Steve Jones > *Sent:* Saturday, June 29, 2024 10:10 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* [AFMUG] Multipath mitigation > > > > Is there an SM side solution for this? We have a handful of customers we > have to go out twice a year to move their equipment up 5 feet or down 5 > feet. In the fall, I love to point out they just harvested the field across > the road, didnt they. theyre always "how did you know" > > > > I could take the loss hit in many of these cases to do a splitter and > diverse antennas, but would that harm or hurt more? > > > > Some of them we just have 2 radios installed a spring and fall radio, we > just have them swap which ones plugged in. 2 450b SMs leaves a lot of > budget for something that doesnt require touching > > > > One of you geeks has to have come up with a solution over the years > other than truck rolls. > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
