If you don't figure something out, let me know. We have the tools to figure that stuff out, so I could send someone over.
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Ken Hohhof" <khoh...@kwom.com> To: "AnimalFarm Microwave Users Group" <af@af.afmug.com> Sent: Wednesday, June 5, 2024 2:24:49 AM Subject: [AFMUG] troubleshooting telco pairs Anybody remember your POTS troubleshooting skills? I’m trying to get an alarm system to work from a VoIP ATA over about 1000 feet of convoluted wiring at a farm, a combination of overhead and buried. I get tone on my tone tracer (Tempo brand) but 0 VDC on a buttset or voltmeter. It’s too far for my Fluke cable tester which is meant for data cables. I suspect one wire in the pair is open, but I don’t know how to check this with just a tone tracer. The alarm system just calls and plays a recorded voice announcement, so the VoIP part shouldn’t be tricky at all, not like FAX machines or alarms that use modems. But it can’t even seize the line and call out. -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
