+1We have used theband-it to secure cables on a tower. It's a great product, but I would not consider it strong enough to secure an antenna mount.
bp
<part15sbs{at}gmail{dot}com>
On 2/21/2024 7:43 AM, dmmoff...@gmail.com wrote:
One of these? https://www.linemen-tools.com/General_Purpose_Mount_10_x_5_Mounting_bracket_p/alu-d-4080-bs1.htm Basically the same thing as the band-it, but bigger. It's supposed to be bands around the pole and then use the holes in the channel for mounting something. I guess there's no reason it wouldn't work backwards though. -----Original Message----- From: AF <af-boun...@af.afmug.com> On Behalf Of Matt Sent: Wednesday, February 21, 2024 9:47 AM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Wood Pole Mount Similar to this principle but much heavier. https://www.grainger.com/product/BAND-IT-Banding-Bracket-Fits-3-4-in-2LNV5 Hose clamp goes through slots and around the steel pipe. Bolt goes through the wood pole. On Tue, Feb 20, 2024 at 5:27 PM <dmmoff...@gmail.com> wrote:I've been wracking my brain on that description. If there's band clamp it usually goes the other way, with a band clamp around the pole and they give you either a stud or a threaded hole to mount your equipment on. I wonder if they took a banding mount and just installed it backwards. -----Original Message----- From: AF <af-boun...@af.afmug.com> On Behalf Of Matt Sent: Tuesday, February 20, 2024 2:54 PM To: af@af.afmug.com Subject: Re: [AFMUG] Wood Pole Mount I like this but pricey but still will likely go with it if I find nothing else. https://www.commscope.com/product-type/structural-support-tools-access ories/structural-support-equipment/structural-mounts/pipe-mounts/itemd b365w/ I saw one on a pole a few weeks back that had a banding bracket with a hose clamp that went around the steel pipe and a long bolt that went through the wood pole. Been looking online for something like that with no luck. Its like above with bolt through pole but instead of clamp kit it had a banding bracket and hose clamp to attach to the metal pipe. Have used j-arms for this before but they're flimsy and have had them blow over in the wind. Not wanting that to happen in this application. On Tue, Feb 20, 2024 at 9:29 AM Matt <matt.mailingli...@gmail.com> wrote:I need to mount a small steel pole to a wood light pole. The kits I see online are like $300 range and way more robust than I need. Just mounting a small yagi a few feet above the top of the wood pole. Does anyone know of anything?-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
