But on the nut, curve in or out?... ;-)
-----Original Message-----
From: dmmoff...@gmail.com
Sent: Tuesday, February 20, 2024 4:04 PM
To: 'AnimalFarm Microwave Users Group'
Subject: Re: [AFMUG] Wood Pole Mount
If you're putting that rod through a pole, spend an extra $2 on a square
curve washer for the back side:
https://www.linemen-tools.com/Square_Curved_Washer_2_1_2_x_2_1_2_x_3_16_J6822_p/h-j6822.htm
What you're describing might be a conduit standoff bracket. That same
linemen-tools.com site may have something similar if you dig through their
catalog.
-Adam
-----Original Message-----
From: AF <af-boun...@af.afmug.com> On Behalf Of Matt
Sent: Tuesday, February 20, 2024 2:54 PM
To: af@af.afmug.com
Subject: Re: [AFMUG] Wood Pole Mount
I like this but pricey but still will likely go with it if I find nothing
else.
https://www.commscope.com/product-type/structural-support-tools-accessories/structural-support-equipment/structural-mounts/pipe-mounts/itemdb365w/
I saw one on a pole a few weeks back that had a banding bracket with a hose
clamp that went around the steel pipe and a long bolt that went through the
wood pole. Been looking online for something like that with no luck. Its
like above with bolt through pole but instead of clamp kit it had a banding
bracket and hose clamp to attach to the metal pipe.
Have used j-arms for this before but they're flimsy and have had them blow
over in the wind. Not wanting that to happen in this application.
On Tue, Feb 20, 2024 at 9:29 AM Matt <matt.mailingli...@gmail.com> wrote:
I need to mount a small steel pole to a wood light pole. The kits I
see online are like $300 range and way more robust than I need. Just
mounting a small yagi a few feet above the top of the wood pole. Does
anyone know of anything?
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
