If your site is 100% DC-powered, the batteries should provide all the
isolation you need. My suggestion is to just switch to DC plant.
bp
<part15sbs{at}gmail{dot}com>
On 1/8/2023 11:21 AM, Jan-GAMs wrote:
Ever since a food truck started plugging their truck into the same
power source we use we've been experiencing severe packet loss through
it. Possibly electrical motor-hum? Anyway, I'm wondering what is
available or suggested to use to place a better electrical isolation
for a battery backup in the box on the tower.
We're using two ubiquiti radios one cheap ubiquiti router and a Cisco
fiber to ether-net router. We have a cyberpower 450va that provides
power for less than an hour when we have a power outage. It would be
better if we could use something more hefty. The NEMA box is 2ft x
2ft x 8in. Inside is 2ft x 2ft x 6in. So there isn't much room.
I'm thinking maybe a stack of batteries, a charger and a sine-wave
invertor? Unless someone knows of a product that would do what's needed?
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
