Yes, all 450 gear uses the same software and requires no special consideration with regards to timing…
Considerations (as always) are: Frame Period (2.5ms or 5ms), Contention Slots (though this can now be set to ‘auto’), Duty Cycle (UL/DL Ratio) and Max Range You can refer to the Configuration Guide (https://support.cambiumnetworks.com/files/pmp450/ ) for additional information, a good section at page 250, and a section on the Frame Calculator at page 389. Matt From: AF <af-boun...@af.afmug.com> On Behalf Of Carl Peterson Sent: Tuesday, May 3, 2022 10:14 AM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: [ External ] [AFMUG] Cambium Timing We still have our cambium network timed as if it were collocated with legacy 100 gear but the 100 gear is long gone so I'm looking to re-time everything. Not finding colocation info about 450M, 450, 450i. Is timing all the same on them? Seems to be but I haven't done this in over a decade.
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
