That's what I used to do. It seemed to work well until we would need to address the units down the road. The ands fractured and broke apart. Too much pressure.
On Wed, May 26, 2021, 1:54 PM TJ Trout <t...@voltbb.com> wrote: > I think you could probably flatten the cladding and remove all but 5mm of > it and slip it into the connector, but even if possible would be > time consuming > > On Wed, May 26, 2021 at 11:10 AM Steve Jones <thatoneguyst...@gmail.com> > wrote: > >> We got into it because of a dickhead squirrel. It's a bear, but we have >> had zero issues in like 10 years. We recently moved back to regular outdoor >> since everything is coming with the tape now. >> >> >> >> On Wed, May 26, 2021, 12:48 PM TJ Trout <t...@voltbb.com> wrote: >> >>> I bought some bbdge to be in the cool kids club but only used it once, >>> what a pain in the ass. We use Epcom shielded cable now, it's amazing >>> stuff. >>> >>> On Wed, May 26, 2021, 10:45 AM TJ Trout <t...@voltbb.com> wrote: >>> >>>> No it won't fit, you would need to solder a #22-24 wire to the cladding >>>> and then the connector will take the drain wire you soldered on the side >>>> esd crimp lug >>>> >>>> On Tue, May 25, 2021, 10:51 PM Steve Jones <thatoneguyst...@gmail.com> >>>> wrote: >>>> >>>>> we use a lot of bbdge, of you have an ezrj45 design that takes that >>>>> without breaking the housing over time, youre a god. its the copper clad >>>>> cable, not foil and drain >>>>> >>>>> >>>>> On Wed, May 26, 2021 at 12:44 AM TJ Trout <t...@voltbb.com> wrote: >>>>> >>>>>> do you use ezrj45? I can send you some that make shielded >>>>>> terminations super simple, send me your addy offlist >>>>>> >>>>>> On Tue, May 25, 2021 at 9:28 PM Steve Jones < >>>>>> thatoneguyst...@gmail.com> wrote: >>>>>> >>>>>>> is this a protected component? or is it acceptable for scumbags like >>>>>>> me to just bond the shield and use regular RJ45?. >>>>>>> -- >>>>>>> AF mailing list >>>>>>> AF@af.afmug.com >>>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
