I am just redesigning this for our network. Juniper MX204 acting as BNG and Edge - Plenty of balls to do both. You need subscriber services licensing which isn't cheap. The 204 is replacing two MX5s and a MX104. Juniper ACX2100 to run management out of band and as an emergency router. If it was just doing OOB MGMT an 1100 or 1000 would be fine.
If you aren't running a BNG, an ACX2100 or even 1100 or 1000 could run the whole thing. I run 1100s in ODC100 cabinets connected to an E7-2 which works well. On Mon, Jan 11, 2021 at 12:38 PM Sterling Jacobson <sterl...@avative.net> wrote: > I’m not sure how management works on Calix, but you might need a separate > management network? Maybe on a management VLAN? > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Chuck McCown via AF > *Sent:* Monday, January 11, 2021 11:34 AM > *To:* af@af.afmug.com > *Cc:* Chuck McCown <ch...@go-mtc.com> > *Subject:* [AFMUG] Minimum NOC gear > > > > What would be the minimum block diagram for feeding my Calix system? > > > > Inbound DIA circuit > > Router > > DHCP > > > > Anything else? > > I have the C.O. building, the battery plant, back up power etc etc. > > Right now I am taking a feed off of another Calix system. So I am > essentially just a subdivision off of them. > > But if I had to do it without them, curious what all I need. > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
