Sounds like maybe seizing / galling / cold welding of the stainless steel bolt and nut. The anti-seize with the silver flecks in it is messy but does work. Or replace the nuts with brass or silicon-bronze.
From: AF <af-boun...@af.afmug.com> On Behalf Of Jason McKemie Sent: Tuesday, October 27, 2020 4:33 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Ubiquiti AF 60G Yes. On Tue, Oct 27, 2020 at 4:03 PM Ken Hohhof <af...@kwisp.com <mailto:af...@kwisp.com> > wrote: Stainless steel U-bolt and nuts? From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf Of Jason McKemie Sent: Tuesday, October 27, 2020 3:40 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> > Subject: Re: [AFMUG] Ubiquiti AF 60G Ha, no, plenty of threat left. It was at the upper end of what the u-bolt would fit around. On Tuesday, October 27, 2020, Carl Peterson <cpeter...@portnetworks.com <mailto:cpeter...@portnetworks.com> > wrote: Was your pipe too small? Thats what she said -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
