Microtrenching is cheap, easy and quick. From: Adam Moffett Sent: Friday, October 23, 2020 4:51 PM To: af@af.afmug.com Subject: Re: [AFMUG] HDD TCO
expensive, but I suppose NOT repaving roads and driveways makes up for it. On 10/23/2020 4:42 PM, ch...@wbmfg.com wrote: I would never get 2 guys to drill and pull back 800’ a day along with handholes. Maybe 3 guys if in good dirt. That is two drill shots. So two pull backs. Moving and setting up. If I get 450/’day complete out of a 3 man crew I am happy. From: Mike Hammett Sent: Friday, October 23, 2020 2:04 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] HDD TCO Other than people that are less productive due to having more difficult ground to work in, does this math work out? ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ------------------------------------------------------------------------------ From: "Jim Bouse [Brazos WiFi]" mailto:j...@brazoswifi.com To: "AnimalFarm Microwave Users Group" mailto:af@af.afmug.com Sent: Thursday, October 22, 2020 6:59:57 PM Subject: Re: [AFMUG] HDD TCO Rough number for 2 men, 1 vermeer 20x22 drill, 1 mini-x, 2 trucks, 2 trailers, and 1 hydrovac is about $50k a month (including materials). My guys produce about 800ft a day of conduit and vaults on 4x10 work weeks. This yields roughly 12000ft a month which breaks down to about $4/ft. Once equipment is paid off, the cost is closer to $1.50-2/ft. This is in rural subdivisions where we have to drill 100%. When we catch a break and can use the plow, we can knock out thousands of feet daily. Replies to AMFUG go to a folder. If you have questions, make sure you CC my email address. Jim Sent via the Samsung Galaxy S8 Active, an AT&T 5G Evolution capable smartphone -------- Original message -------- From: Adam Moffett mailto:dmmoff...@gmail.com Date: 10/22/20 6:50 PM (GMT-06:00) To: AnimalFarm Microwave Users Group mailto:af@af.afmug.com Subject: [AFMUG] HDD TCO Has anyone calculated their TCO on an HDD machine? After figuring in the operator, maintenance, tooling/bits, etc what do you end up spending on this? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com ------------------------------------------------------------------------------ -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
