AMFUG doesn't sound good.
From: AF <af-boun...@af.afmug.com> On Behalf Of Jim Bouse [Brazos WiFi] Sent: Thursday, October 22, 2020 7:00 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] HDD TCO Rough number for 2 men, 1 vermeer 20x22 drill, 1 mini-x, 2 trucks, 2 trailers, and 1 hydrovac is about $50k a month (including materials). My guys produce about 800ft a day of conduit and vaults on 4x10 work weeks. This yields roughly 12000ft a month which breaks down to about $4/ft. Once equipment is paid off, the cost is closer to $1.50-2/ft. This is in rural subdivisions where we have to drill 100%. When we catch a break and can use the plow, we can knock out thousands of feet daily. Replies to AMFUG go to a folder. If you have questions, make sure you CC my email address. Jim Sent via the Samsung Galaxy S8 Active, an AT&T 5G Evolution capable smartphone -------- Original message -------- From: Adam Moffett <dmmoff...@gmail.com <mailto:dmmoff...@gmail.com> > Date: 10/22/20 6:50 PM (GMT-06:00) To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> > Subject: [AFMUG] HDD TCO Has anyone calculated their TCO on an HDD machine? After figuring in the operator, maintenance, tooling/bits, etc what do you end up spending on this? -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
