Re: [AFMUG] OT metal detectors

Thu, 01 Oct 2020 12:48:58 -0700

We have a concrete stepping stone about 1' diameter over the top of the septic drain field diverter valve. It is covered by about 1 or 2 inches of soil, and always becomes "invisible" when I have to access it once a year to switch drain fields. I use a 5' metal pry bar I refer to as "Big Bertha" to poke around the area. No metal detector.

bp
<part15sbs{at}gmail{dot}com>
On 10/1/2020 12:42 PM, Ken Hohhof wrote:

I remember my dad bought a new house in the suburbs with a spot in the parkway where no matter what he did, the grass always turned brown.  Finally he went to dig it up and discovered they had laid sod over a manhole cover.

 

I’m not saying there was a layer of dirt over the manhole, it was directly under the sod.  Only metal detector required was a shovel.

 

 

From: AF <af-boun...@af.afmug.com> On Behalf Of ch...@wbmfg.com
Sent: Thursday, October 1, 2020 1:45 PM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Subject: Re: [AFMUG] OT metal detectors

 

I am guessing it is magnetic detector.  He uses it to find manhole covers that have been paved over and valve bodies. 

 

From: Carl Peterson

Sent: Thursday, October 1, 2020 12:25 PM

To: AnimalFarm Microwave Users Group

Subject: Re: [AFMUG] OT metal detectors

 

Was it a metal detector or a magnetic locator?  The former can only detect down ~12" max.  the latter can detect pretty deep depending on the size of the object.  I'd guess a drill head could be found 6-10' down.  

 

 

On Wed, Sep 30, 2020 at 8:08 AM Chuck McCown <ch...@wbmfg.com> wrote:

They say GPR will not work in our soil.

Sent from my iPhone



On Sep 30, 2020, at 6:29 AM, Louis Arsenault <lo...@ntinet.com> wrote:



Our water guys can barely find the valves on top of the ground and to find anything under the ground they use a poking stick until it hits something then draw a blue line.

This is why we use a GPR to find the water lines but it will pick up almost all the utilities.

 

 

On Tue, Sep 29, 2020 at 5:51 PM <ch...@wbmfg.com> wrote:

Had a drill rod break today.  The guys did not know where the end was because the sonde went to sleep on them.  Had the local water guy go over with his metal detector and help them find it. 

 

I am going to ask him what kind he has.  Anyone here use them?  Any opinions?

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

 

 

--

-Louis

NTInet
O: 803-533-1660 X 207
C: 803-997-0004

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

 

 

--

Carl Peterson

PORT NETWORKS

401 E Pratt St, Ste 2553

Baltimore, MD 21202

(410) 637-3707

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com





-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to