DS modulation doesn't imply that MU-MIMO is actually being used though. MU-MIMO only kicks in when the AP is approaching maximum frame utilization.
On Wed, Sep 23, 2020 at 2:18 PM Steve Jones <thatoneguyst...@gmail.com> wrote: > ds is mumimo > > On Wed, Sep 23, 2020 at 12:10 PM Nate Burke <n...@blastcomm.com> wrote: > >> We replaced an EPMP2k AP with an EPMP3k AP yesterday. Both had BSA >> attached, Same RF Channel. Mix of EPMP 1000/200/300 SMs >> >> EPMP1000/200 SMs did not have any change, either Signal or Modulation. >> EPMP300 SMs had a signal increase of 3-4db and noticeable increase in >> modulation on upstream, and a slight increase in downstream. >> >> Biggest difference is BW through the AP is up about 25% today, and Frame >> utilization is 50% less than the EPMP2k AP. Watching the BW chart in >> the AP, I don't see MU-MIMO being activated at all. >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
