Are we talking about AC on the contacts?
Coil will only work with what it’s specified for (AC or DC).
Contacts will be fine with AC if they have a DC rating. The inverse isn’t
necessarily true.
Mark
> On Sep 21, 2020, at 3:17 PM, Bill Prince <part15...@gmail.com> wrote:
>
> But the reverse is generally not a problem. AC RMS current is much less
> demanding than continuous DC current.
>
>
>
> bp
> <part15sbs{at}gmail{dot}com>
> On 9/21/2020 9:40 AM, ch...@wbmfg.com <mailto:ch...@wbmfg.com> wrote:
>> I have had AC coil relays get stuck closed with putting DC on them.
>>
>> From: TJ Trout <>
>> Sent: Monday, September 21, 2020 10:30 AM
>> To: AnimalFarm Microwave Users Group <>
>> Subject: Re: [AFMUG] Site Monitor Relay Question
>>
>> it will work fine
>>
>> On Mon, Sep 21, 2020 at 8:34 AM <ch...@wbmfg.com <>> wrote:
>> Yes, some do. Some will get magnitized if they are AC relays and you use DC
>> on them.
>>
>> -----Original Message-----
>> From: Nate Burke
>> Sent: Monday, September 21, 2020 9:29 AM
>> To: Animal Farm
>> Subject: [AFMUG] Site Monitor Relay Question
>>
>> The Specsheet for the 4 channel relay output unit says 1A@24VDC. I want
>> to control some HVAC Dampers that are running at 24VAC. The Relay
>> doesn't care if it's VAC or VDC right?
>>
>> --
>> AF mailing list
>> AF@af.afmug.com <>
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
>>
>>
>> --
>> AF mailing list
>> AF@af.afmug.com <>
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
>>
>> --
>> AF mailing list
>> AF@af.afmug.com <mailto:AF@af.afmug.com>
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
>>
>>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
