Re: [AFMUG] Site Monitor Relay Question

[Bill Prince]

But the reverse is generally not a problem. AC RMS  current is much less demanding than continuous DC current.

bp
<part15sbs{at}gmail{dot}com>

On 9/21/2020 9:40 AM, ch...@wbmfg.com wrote:

I have had AC coil relays get stuck closed with putting DC on them. 

 

From: TJ Trout

Sent: Monday, September 21, 2020 10:30 AM

To: AnimalFarm Microwave Users Group

Subject: Re: [AFMUG] Site Monitor Relay Question

 

it will work fine

 

On Mon, Sep 21, 2020 at 8:34 AM <ch...@wbmfg.com> wrote:

Yes, some do.  Some will get magnitized if they are AC relays and you use DC
on them.

-----Original Message-----
From: Nate Burke
Sent: Monday, September 21, 2020 9:29 AM
To: Animal Farm
Subject: [AFMUG] Site Monitor Relay Question

The Specsheet for the 4 channel relay output unit says 1A@24VDC.  I want
to control some HVAC Dampers that are running at 24VAC.  The Relay
doesn't care if it's VAC or VDC right?

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com


--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

---

--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com