Same stores that sell high flush toilets and incandescent bulbs? Or can we buy those again, wasn’t that part of MAGA? Wall, toilets, bulbs, done.
From: AF <af-boun...@af.afmug.com> On Behalf Of ch...@wbmfg.com Sent: Thursday, August 27, 2020 3:13 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] [ External ] Audio tune 450i SMs? You usta could get resisters in Canada. From: Sam Lambie Sent: Thursday, August 27, 2020 2:02 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] [ External ] Audio tune 450i SMs? I'll find out tomorrow. I just made a cable without resistors. I can't hear shit in the high frequency tones and wear hearing aids, so this will be a good test. On Thu, Aug 27, 2020 at 1:11 PM Matt Mangriotis via AF <af@af.afmug.com <mailto:af@af.afmug.com> > wrote: The resistors change the frequency of the tone. In fact, some people may prefer the tone without any resistors at all… and sometimes (perhaps inadvertently) the tone frequency changes with updates to the software revision. The team does test this feature, but I can’t say that I have first hand experience using it with a cable with that specific value resistor… so couldn’t tell you what it sounds like on the currently released version of software. From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf Of Ken Hohhof Sent: Thursday, August 27, 2020 1:58 PM To: 'AnimalFarm Microwave Users Group' <af@af.afmug.com <mailto:af@af.afmug.com> > Subject: Re: [AFMUG] [ External ] Audio tune 450i SMs? I bought one 450i SM by mistake once, I somehow thought the 3 GHz SM with the integral panel was discontinued when the 450b came out. And I built one of those stupid cables, including the 220 ohm resistors (which I suspect aren’t really needed). Have you tried to buy resistors lately? No more Radio Shacks, Frys doesn’t carry components anymore, I found some in the discontinued items bin at MicroCenter. Bottom line, when I realized I would also need a 48V POE, I put that SM on the shelf where it still sits today. I’m not sure why you’d want one. On top of everything else, it’s very expensive. I think its claim to fame is the dynamically tuned front end filter, which I guess would help if you had extremely high adjacent channel interference. I should really put it on eBay or something. From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf Of Matt Mangriotis via AF Sent: Thursday, August 27, 2020 12:38 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> > Cc: Matt Mangriotis <matt.mangrio...@cambiumnetworks.com <mailto:matt.mangrio...@cambiumnetworks.com> > Subject: Re: [AFMUG] [ External ] Audio tune 450i SMs? Sam – Please see this forum post… https://community.cambiumnetworks.com/t/pmp450i-sm-alignment-tones/54898 <https://nam05.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcommunity.cambiumnetworks.com%2Ft%2Fpmp450i-sm-alignment-tones%2F54898&data=02%7C01%7Cmatt.mangriotis%40cambiumnetworks.com%7C7bf06b2dabba4e62576b08d84abb44ea%7C0e263e36340946228ac818d993e76eb6%7C0%7C1%7C637341515507837732&sdata=hWLd2jywJmoe4OtzpMWHsFupqHwciHIFsmWA%2BX8GTAI%3D&reserved=0> Matt From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf Of Sam Lambie Sent: Thursday, August 27, 2020 12:27 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> > Subject: [ External ] [AFMUG] Audio tune 450i SMs? I just installed my 1st 450i sm and am stumped on how to tune with an audio speaker like the old 450 and 450bs. What am I missing? -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com> _____ -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
