Yeah the step ladder is critical.
The pipe wrench really isn't. I know it's from my own list, but I don't
really use it that often. Sometimes it's helpful to be able to hold
onto a round object, and sometimes it's just a spare hammer, and
sometimes it's the only thing I have that'll turn a nut too large for my
crescent or sockets.
On 8/25/2020 3:04 PM, ch...@wbmfg.com wrote:
5’ step ladder
*From:* ch...@wbmfg.com
*Sent:* Tuesday, August 25, 2020 12:49 PM
*To:* AnimalFarm Microwave Users Group
*Subject:* Re: [AFMUG] Installer tool list
This is how it currently looks now:
*Installer’s Tool Bag/Belt*
Electric drill
Phillips bit for drill
Bell hangers bit. .250”
Arrow T-18 stapler and staples
Markers
Zip tie labels
Zip ties
Screw-in anchors
*Installer’s Truck - MEL*
2 Batteries
Charger that can plug into 12V
Arrow T-18 Staples
Glow rods
Long flex bit
Alcohol
One click cleaners for SC/APC
#6, 8 & 10 Philips pan head sheet metal screws
Duct Cutter
VFL
*Optional but recommended*
Fish tape
Caulk
Electrical tape (at least black and white, red and green)
Micro screwdrivers
Standard screwdrivers
Mini socket set with common sizes
open end wrenches in common sizes (maybe 5 metric, 5 ANSI with a
different size on each end of the wrench)
Several types of pliers (linesman, needle nose, common)
Diagonal cutters (big ones, and tiny nippers)
Hammer
Crescent wrench
Vise Grips
Pipe wrench
Micro screwdrivers
Spudger/booger pick
Wire brush
Utility knife with blades
Electrician scissors
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
